Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Shrouded Header (4 Sides) HDR 2 POS 2.5mm Solder ST Thru-Hole
Available Stock
871
Estimated Ship Time:6-12 working days
10+$0.3686
100+$0.3303
2,500+$0.3185
5,000+$0.3185
- +
Ext. Price(USD):$25.80
MOQ:70
Mult:10
Conn Shrouded Header M 3 POS 3.5mm Solder RA Thru-Hole
Available Stock
764
Estimated Ship Time:6-12 working days
10+$0.6851
100+$0.6138
1,000+$0.5919
2,500+$0.5919
- +
Ext. Price(USD):$27.40
MOQ:40
Mult:10
Conn Shrouded Header M 6 POS 3.5mm Solder ST Thru-Hole
Available Stock
272
Estimated Ship Time:6-12 working days
10+$1.1516
100+$1.131
500+$1.131
1,000+$1.1105
2,500+$1.1105
- +
Ext. Price(USD):$24.18
MOQ:21
Mult:1
TERMINAL BLOCK, HEADER, 6POS, TH; Gender:Header; Pitch Spacing:5.08mm; No. of Positions:6Ways; Rated Current:15A; Rated Voltage:300V; Block Orientation:Through Hole Right Angle; Product Range:-; SVHC:No SVHC (07-Jul-2017
Available Stock
4,840
Estimated Ship Time:6-12 working days
10+$1.1299
100+$1.1097
500+$1.1097
1,000+$1.0895
2,500+$1.0895
- +
Ext. Price(USD):$24.85
MOQ:22
Mult:1
Conn Shrouded Header M 5 POS 3.5mm Solder ST Thru-Hole
Available Stock
150
Estimated Ship Time:5-12 working days
25+$0.8476
250+$0.759
7,500+$0.6313
10,000+$0.5939
- +
Ext. Price(USD):$30.51
MOQ:36
Mult:1
SPQ:500
Conn Shrouded Header HDR 6 POS 3.81mm Solder ST Thru-Hole
Available Stock
93
Estimated Ship Time:5-12 working days
50+$1.1052
250+$0.858
7,500+$0.6773
10,000+$0.6409
- +
Ext. Price(USD):$55.26
MOQ:50
Mult:1
SPQ:500
Shrouded Header, 8 Pos, 5mm Pitch, Solder, Straight, Thru-Hole
Available Stock
32
Estimated Ship Time:5-12 working days
25+$2.0217
250+$1.276
7,500+$1.1246
10,000+$1.1192
- +
Ext. Price(USD):$50.54
MOQ:25
Mult:1
SPQ:250
TERM BLOCK HDR 3POS 5.08MM
Available Stock
4,890
Estimated Ship Time:9-14 working days
25+$0.7875
50+$0.7104
500+$0.5304
1,000+$0.4961
- +
Ext. Price(USD):$26.77
MOQ:34
Mult:1
SPQ:1
Conn Wire to Board HDR 2 POS 5mm Solder ST Top Entry Thru-Hole
Available Stock
126
Estimated Ship Time:5-12 working days
50+$0.4346
500+$0.3719
10,000+$0.3051
15,000+$0.2845
- +
Ext. Price(USD):$30.42
MOQ:70
Mult:1
SPQ:1,000
Conn Unshrouded Header HDR 12 POS 5mm Solder ST Top Entry Thru-Hole T/R
Available Stock
34
Estimated Ship Time:5-12 working days
25+$1.84
100+$1.573
5,000+$1.3268
8,000+$1.3161
- +
Ext. Price(USD):$46.00
MOQ:25
Mult:1
SPQ:1,000
Shrouded Header HDR 5 POS 5.08mm Solder Right Angle Thru-Hole
Available Stock
1,100
Estimated Ship Time:5-12 working days
50+$0.7566
250+$0.6475
7,500+$0.5536
10,000+$0.5245
- +
Ext. Price(USD):$37.83
MOQ:50
Mult:1
SPQ:500
Vertical Headers
Available Stock
470
Estimated Ship Time:5-12 working days
25+$0.8372
250+$0.7161
7,500+$0.611
10,000+$0.5799
- +
Ext. Price(USD):$30.13
MOQ:36
Mult:1
SPQ:500
Available Stock
702
Estimated Ship Time:5-12 working days
25+$1.5088
250+$1.2694
7,500+$0.9405
10,000+$0.8753
- +
Ext. Price(USD):$37.72
MOQ:25
Mult:1
SPQ:500
Unshrouded Header, 1 Row, TH
Available Stock
222
Estimated Ship Time:5-12 working days
100+$0.5274
500+$0.4876
15,000+$0.31
25,000+$0.3092
- +
Ext. Price(USD):$52.74
MOQ:100
Mult:1
SPQ:1,000
Wire-to-Board Connector Header 5 Pos 3.81mm Solder Right Angle Thru-Hole
Available Stock
780
Estimated Ship Time:5-12 working days
50+$0.7797
250+$0.6677
7,500+$0.5703
10,000+$0.5404
- +
Ext. Price(USD):$38.98
MOQ:50
Mult:1
SPQ:500
Conn Unshrouded Header HDR 4 POS 3.5mm Solder ST Top Entry Thru-Hole T/R
Available Stock
968
Estimated Ship Time:6-13 working days
10+$1.1845
25+$1.1362
500+$0.769
1,000+$0.6307
- +
Ext. Price(USD):$14.21
MOQ:12
Mult:1
SPQ:1
Conn Shrouded Header HDR 15 POS 5.08mm Solder RA Thru-Hole
Available Stock
167
Estimated Ship Time:5-12 working days
25+$3.024
100+$2.079
5,000+$1.7655
7,500+$1.7548
- +
Ext. Price(USD):$75.60
MOQ:25
Mult:1
SPQ:250
Shrouded Header HDR 4 POS 5mm Solder RA Side Entry Thru-Hole
Available Stock
360
Estimated Ship Time:5-12 working days
25+$1.679
100+$1.441
5,000+$1.284
7,500+$1.2733
- +
Ext. Price(USD):$41.97
MOQ:25
Mult:1
SPQ:500
Shrouded Header Connector, HDR 6 Pos, 5.08mm Pitch, Solder RA Thru-Hole
Available Stock
500
Estimated Ship Time:6-13 working days
1+$1.886
10+$1.6905
2,500+$1.0292
5,000+$1.0022
- +
Ext. Price(USD):$15.08
MOQ:8
Mult:1
SPQ:1
Conn Shrouded Header HDR 6 POS 3.5mm Solder ST Top Entry Thru-Hole T/R
Available Stock
365
Estimated Ship Time:5-12 working days
50+$1.1402
250+$0.9339
8,000+$0.6195
15,000+$0.6174
- +
Ext. Price(USD):$57.01
MOQ:50
Mult:1
SPQ:1,000
Vertical Headers, 3.5mm Centerline, 3-Position
Available Stock
880
Estimated Ship Time:5-12 working days
50+$0.5936
250+$0.5425
10,000+$0.4255
15,000+$0.3974
- +
Ext. Price(USD):$30.27
MOQ:51
Mult:1
SPQ:1,000
Wire-to-Board Connector HDR 7 Pos 5mm Solder Straight Top Entry Thru-Hole
Available Stock
70
Estimated Ship Time:5-12 working days
25+$1.449
100+$1.254
5,000+$1.1128
7,500+$1.1021
- +
Ext. Price(USD):$36.22
MOQ:25
Mult:1
SPQ:250
Conn Shrouded Header HDR 3 POS 3.81mm Solder ST Thru-Hole
Available Stock
4,808
Estimated Ship Time:5-12 working days
100+$0.5525
500+$0.4293
15,000+$0.3029
25,000+$0.299
- +
Ext. Price(USD):$55.25
MOQ:100
Mult:1
SPQ:1,000
Shrouded Header, 5-Pos, 3.81mm Pitch, Solder, ST, TH
Available Stock
747
Estimated Ship Time:5-12 working days
50+$0.9206
250+$0.7154
7,500+$0.5642
10,000+$0.5345
- +
Ext. Price(USD):$46.03
MOQ:50
Mult:1
SPQ:500
Wire to Board HDR 4 POS 5mm Solder Straight Thru-Hole
Available Stock
287
Estimated Ship Time:5-12 working days
25+$2.6096
100+$1.793
5,000+$1.4873
7,500+$1.4766
- +
Ext. Price(USD):$65.24
MOQ:25
Mult:1
SPQ:500
25 / PageGoto