Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Ejector Header HDR 50 POS 2.54mm Solder RA Side Entry Thru-Hole
Available Stock
1,000
Estimated Ship Time:4-6 working days
20+
100+$2.3906
200+$2.3508
400+$2.2911
- +
Ext. Price(USD):$239.06
MOQ:100
Mult:100
SPQ:100
Available Stock
100
Estimated Ship Time:14-17 working days
50+$0.8782
100+$0.7988
2,000+$0.704
4,000+$0.704
- +
Ext. Price(USD):$50.05
MOQ:57
Mult:1
SPQ:1
Available Stock
523
Estimated Ship Time:6-13 working days
1+$2.99
10+$2.5415
2,400+$1.5552
4,800+$1.4796
- +
Ext. Price(USD):$14.95
MOQ:5
Mult:1
SPQ:1
Shrouded Header (2 Sides), HDR 30 POS, 1.25mm Pitch, Solder ST Top Entry, SMD
Available Stock
17
Estimated Ship Time:6-12 working days
10+$1.6346
100+$1.5346
500+$1.4333
1,000+$1.2962
2,500+$1.2128
- +
Ext. Price(USD):$26.15
MOQ:16
Mult:1
Ejector Header, 16 POS, 2.54mm, Solder RA Side Entry, TH
Available Stock
853
Estimated Ship Time:5-10 working days
1+$4.219
- +
Ext. Price(USD):$8.43
MOQ:2
Mult:1
Connector Ejector Header, HDR, 60 POS, 2.54mm, Solder, ST, Top Entry, TH
Available Stock
47
Estimated Ship Time:5-10 working days
1+$11.3441
20+$10.9999
75+$10.6558
300+$10.4391
600+$10.2097
- +
Ext. Price(USD):$11.34
MOQ:1
Mult:1
Hirose 2.54mm Pitch 26P Double Row Header, Wire-to-Board Connector, HIF3B Series, Straight, TH
Available Stock
117
Estimated Ship Time:5-10 working days
1+$7.0741
50+$6.8319
100+$6.5133
- +
Ext. Price(USD):$7.07
MOQ:1
Mult:1
Conn Stacker Ejector Header HDR 50 POS 2.54mm Wire Wrap ST Thru-Hole
Available Stock
3
Estimated Ship Time:5-10 working days
1+$15.6268
5+$15.0022
10+$14.3777
- +
Ext. Price(USD):$15.62
MOQ:1
Mult:1
Conn Ejector Header HDR 20 POS 2.54mm Solder RA Side Entry Thru-Hole
Available Stock
132
Estimated Ship Time:5-10 working days
1+$7.8644
50+$7.5457
100+$7.2398
- +
Ext. Price(USD):$7.86
MOQ:1
Mult:1
Conn Shrouded Header HDR 30 POS 1.25mm Solder ST Top Entry SMD
Available Stock
1,363
Estimated Ship Time:6-13 working days
1+$2.323
10+$1.8975
2,508+$1.2096
5,016+$1.1664
- +
Ext. Price(USD):$16.26
MOQ:7
Mult:1
SPQ:1
Hirose 2.54mm Pitch 34-Pin Dual Row Header Wire-to-Board Connector, HIF3B Series, Straight, TH
Available Stock
25
Estimated Ship Time:5-10 working days
1+$7.5202
50+$7.2653
100+$6.9212
- +
Ext. Price(USD):$7.52
MOQ:1
Mult:1
Conn Shrouded Header (4 Sides) HDR 12 POS 2mm Solder ST Top Entry SMD Automotive T/R
Available Stock
472
Estimated Ship Time:6-13 working days
1+$3.082
10+$2.806
2,500+$1.728
5,000+$1.6848
- +
Ext. Price(USD):$15.41
MOQ:5
Mult:1
SPQ:1
Hirose Electric
Package:SMD,P=0.6mm
ECAD Model:
Docking Station Connector, 0.6mm Pitch
Available Stock
428
Estimated Ship Time:9-14 working days
1+$11.286
10+$9.5947
100+$8.1556
250+$7.9646
- +
Ext. Price(USD):$33.85
MOQ:3
Mult:1
SPQ:1
Conn Shrouded Header (4 Sides) HDR 40 POS 2.2mm Solder RA SMD Automotive T/R
Available Stock
344
Estimated Ship Time:6-13 working days
1+$6.2675
10+$4.697
400+$3.4452
1,000+$3.3372
- +
Ext. Price(USD):$18.80
MOQ:3
Mult:1
SPQ:1
25 / PageGoto