Modular Plugs

Results:

Match a modular plug to the cable before comparing network category or price. Confirm the position/contact arrangement, conductor construction, wire gauge, insulation diameter and shielding, then verify that the terminated plug mates with the intended jack and fits any required protective housing.

Build the Plug Specification from the Cable Outward

1

Cable Construction

Record whether the cable uses solid or stranded conductors, the conductor gauge, insulation diameter, overall cable diameter and shield construction.

2

Contact Arrangement

Check the required positions and loaded contacts. An 8P8C format is commonly associated with RJ45 Ethernet, but the physical format alone does not confirm cable-category performance.

3

Termination and Plug Body

Match the contact design to the conductor type and select the specified crimp, IDC or field-termination method. Confirm whether the plug is shielded and whether assembly requires a dedicated tool.

4

Mating and Mechanical Fit

Verify mating compatibility with the selected modular jack. If the connection needs strain relief or environmental protection, also check the dimensions required by the RJ45 plug housing.

Cable-to-Plug Compatibility Map

Cable Detail Required Plug Match Mismatch Risk
Solid or stranded conductor Contact geometry specified for that conductor construction Incomplete penetration or an unreliable termination
Wire gauge and insulation diameter Supported conductor and insulation range Conductors may not seat correctly in the plug
Cable outside diameter Plug entry and strain-relief range Poor cable retention or an assembly that cannot close
Shielded or unshielded cable Matching plug shield and grounding arrangement The intended shielding path may be interrupted
Cat5e, Cat6 or Cat6a construction Manufacturer-rated plug for the complete cable and termination system The assembled link may not meet the intended category performance

For a broader explanation of RJ45 identification, shielding and Ethernet cable categories, see the computer cable connector selection guide.

Record a Complete Termination Specification

A usable purchasing specification should identify the cable and termination together rather than requesting an “RJ45 plug” alone.

Interface: positions/contacts  |  Cable: category and shielding  |  Conductors: solid/stranded and AWG  |  Termination: crimp/IDC/field  |  Cable OD: required range
Read More
Modular PlugsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
EZ--RJ45 Cat5 100 Piece Jar; Modular Connector Type:RJ45 Plug; Port Configuration:1 x 1 (Port); No. of Positions / Loaded Contacts (per Port):8P8C; LAN Category:Cat5, Cat5e; IP Rating:-; Connector Mou 06AC3903
Available Stock
358
Estimated Ship Time:6-12 working days
1+$75.2441
5+$73.9004
50+$72.5568
100+$72.5568
- +
Ext. Price(USD):$75.24
MOQ:1
Mult:1
Ez-Rj45 Cat5E Connector
Available Stock
131
Estimated Ship Time:6-12 working days
1+$42.4131
5+$41.6557
50+$40.8983
100+$40.8983
- +
Ext. Price(USD):$42.41
MOQ:1
Mult:1
Connector RJ45 for Cat6E Data Cable
Available Stock
104
Estimated Ship Time:6-12 working days
1+$43.3039
5+$42.5306
50+$41.7573
100+$41.7573
- +
Ext. Price(USD):$43.30
MOQ:1
Mult:1
Ez-Rj45 Cat5E Connector
Available Stock
118
Estimated Ship Time:6-12 working days
1+$28.2308
10+$25.6513
250+$21.9115
500+$21.2244
- +
Ext. Price(USD):$28.23
MOQ:1
Mult:1
25 / PageGoto