Male Pin Headers

Results:

Male pin headers provide exposed male contacts for connecting a PCB to a female socket, cable connector or another board. Select a compatible part by matching pitch, positions, rows, orientation and mounting method first, then verify mating-post length, PCB termination, plating, current rating and mechanical retention.

Start with the PCB Interface

Begin with the PCB layout rather than the connector appearance. Confirm the contact pitch, total number of positions, number of rows and row spacing. The footprint must also support the required through-hole or surface-mount termination and provide sufficient clearance for the connector body and its mating component.

Selection Parameter What to Check Why It Matters
Pitch Center-to-center contact spacing Controls PCB footprint and mating compatibility
Positions and Rows Total contacts, single or dual row, and loaded positions Determines circuit count and connector size
Orientation Vertical or right-angle mating direction Affects enclosure access and board-edge placement
Mounting Method Through-hole or surface-mount termination Defines the PCB layout and assembly process

Build the Required Header Geometry

After defining the footprint, compare the dimensions above and below the insulator. The mating-post length must provide sufficient engagement with the female contact without bottoming out. The PCB-tail length must suit the board thickness, hole design or SMT pad pattern. Insulator height and overall contact length determine the available clearance around the connection.

  • Mating-post length: the exposed male contact available for insertion.
  • PCB-tail length: the portion soldered or terminated to the board.
  • Insulator height: the plastic body height above the PCB.
  • Pin cross-section: the contact width and thickness accepted by the mating socket.
  • Overall length: the complete contact dimension used when comparing alternatives.

Choose Orientation and Mounting

Vertical headers support perpendicular mating above the PCB, while right-angle headers route the connection toward the board edge. Through-hole products provide strong mechanical retention and require compatible finished-hole dimensions. Surface-mount headers reduce the need for plated holes but require a suitable land pattern, adequate coplanarity and stable placement during reflow.

Shrouded, keyed or locking headers can add polarization and retention when the application must reduce misalignment or accidental disconnection. Confirm these mechanical features against the complete connector series rather than relying only on pitch and pin count.

Match the Female Connector

A compatible female connector must match the pitch, positions, rows and contact arrangement of the male header. Also verify the accepted pin cross-section, minimum and maximum mating depth, polarization, keying and contact plating. Browse Female Socket Headers when selecting the corresponding receptacle or socket side.

Check Electrical and Mechanical Requirements

Compare current and voltage ratings, contact resistance, insulation resistance, operating temperature and contact plating. Gold-plated mating surfaces may suit frequent mating or low-level signals, while tin-plated contacts are commonly used for cost-sensitive applications with fewer mating cycles. Environmental conditions, vibration and required retention should also be considered.

For a complete review of pitch, mounting, pin dimensions, datasheets and alternative-part evaluation, refer to the PCB Pin Header Selection Guide.

Choose the Correct Header Category

  • Use male pin headers for conventional exposed male contacts mounted on a PCB.
  • Browse Special Pin Headers when the design requires unusual pin lengths, custom row arrangements or non-standard geometry.
  • Consider Board Stacking Connectors for elevated boards, pass-through contacts or controlled board-to-board spacing.

Prepare a Replacement Checklist

Before approving an alternative, record the pitch, positions, rows, row spacing, orientation, mounting method, mating-post length, PCB-tail length, insulator height, pin cross-section, plating, electrical ratings and mating connector. Confirm the manufacturer drawing and recommended PCB footprint because parts with similar descriptions may have different mechanical dimensions.

Read More
Male Pin HeadersResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Header 3-Pin 1.27mm Push-Pull 1A Gold Black TH 3.81mm(L) × 2.14mm(H)
In Stock3,886
2513+
1+$0.2224
10+$0.1907
50+$0.178
100+$0.1668
- +
Ext. Price(USD):$0.22
MOQ:1
Mult:1
SPQ:1,000
14-Pin Header, Push-Pull, 2mm Pitch, 2A Gold Black TH 21.3mm × 5.4mm
In Stock26
2514+
1+$1.0657
10+$0.9134
50+$0.8525
100+$0.7993
- +
Ext. Price(USD):$1.06
MOQ:1
Mult:1
SPQ:10
10-Pin 1.27mm 2-Row 1.27mm Header Push-Pull 1A Gold TH 6.35mm L × 3.4mm H
In Stock239
2617+
1+$0.8378
10+$0.7181
50+$0.6702
100+$0.6284
- +
Ext. Price(USD):$0.83
MOQ:1
Mult:1
SPQ:10
Header, Push-Pull 2-Pin 2.54mm Pitch Breakaway 3A Gold Black TH 5.08mm × 2.54mm × 2.54mm
In Stock3,088
2624+
1+$0.254
10+$0.2177
50+$0.2032
100+$0.1905
- +
Ext. Price(USD):$0.25
MOQ:1
Mult:1
SPQ:10
14-Pin Header, 2.54mm Pitch, Push-Pull, 3A, Gold Plated, Black, TH, 9.1mm H
In Stock2,651
2544+
1+$0.3768
10+$0.3229
50+$0.3014
100+$0.2826
- +
Ext. Price(USD):$0.37
MOQ:1
Mult:1
SPQ:1,000
40-Pin Header, 2.54mm Pitch, 2 Rows, Push-Pull, 3A, Black, TH, 58.3mm L × 9.1mm H
In Stock74
2502+
1+$0.8585
10+$0.7358
50+$0.6868
100+$0.6438
- +
Ext. Price(USD):$0.85
MOQ:1
Mult:1
SPQ:1
2-Pin Header, 2.54mm Pitch, Breakaway, Push-Pull, 3A, 2.54μm Tin, Black, TH, 5.08mm × 2.54mm × 2.54mm
In Stock156
2610+
1+$0.1963
10+$0.1682
50+$0.157
100+$0.1472
- +
Ext. Price(USD):$0.19
MOQ:1
Mult:1
SPQ:1,000
Header, 20-Pin, 2.54mm Pitch, Push-Pull, 3A, Gold, Black, TH, 32.9mm × 8.8mm × 9.1mm
In Stock736
2527+
1+$0.491
10+$0.4209
50+$0.3928
100+$0.3683
- +
Ext. Price(USD):$0.49
MOQ:1
Mult:1
SPQ:160
Header, 10-Pin, 2.54mm Pitch, Push-Pull, 3A, Gold Plated, Black, TH, 20.2mm × 8.8mm × 9.1mm
In Stock164
2519+
1+$0.3525
10+$0.3021
50+$0.282
100+$0.2644
- +
Ext. Price(USD):$0.35
MOQ:1
Mult:1
SPQ:500
Header 2-Pin 2mm Pitch Push-Pull 2A Gold Black TH
Available Stock
4,376
Estimated Ship Time:9-14 working days
100+$0.117
500+$0.1044
1,000+$0.0994
5,000+$0.0887
10,000+$0.0844
- +
Ext. Price(USD):$26.09
MOQ:223
Mult:1
SPQ:1
30-Pin Header, 2.54mm Pitch, Breakaway, Push-Pull, 3A, Gold Plated, Black, TH
Available Stock
245
Estimated Ship Time:9-14 working days
10+$2.174
100+$1.8476
500+$1.6491
1,000+$1.5704
5,000+$1.4019
- +
Ext. Price(USD):$26.08
MOQ:12
Mult:1
SPQ:1
Header, Breakaway, Push-Pull, 2-Pin, TH, P=2.54mm, 3A, Gold Plated, Black, 5.08mm × 2.54mm
Available Stock
109,216
Estimated Ship Time:9-14 working days
500+$0.0276
1,000+$0.0263
5,000+$0.0235
10,000+$0.0224
- +
Ext. Price(USD):$26.02
MOQ:943
Mult:1
SPQ:1
Header 36-Pin 2.54mm Breakaway Push-Pull 3A 2.54μm Tin Black TH
Available Stock
51
Estimated Ship Time:9-14 working days
1+$3.5748
50+$2.7114
1,000+$2.1948
5,000+$1.9594
- +
Ext. Price(USD):$28.59
MOQ:8
Mult:1
SPQ:1
22-Pin, 2.54mm Pitch, Breakaway Header, Push-Pull, 3A, Tin Plated, Black, TH, 27.9mm × 5.08mm × 2.54mm
Available Stock
86
Estimated Ship Time:9-14 working days
10+$2.0969
- +
Ext. Price(USD):$27.25
MOQ:13
Mult:1
SPQ:1
Header 4-Pin 2.54mm Breakaway Push-Pull 3A Gold Black TH 10.2mm × 2.54mm × 2.54mm
Available Stock
449
Estimated Ship Time:9-14 working days
10+$0.499
100+$0.4242
5,000+$0.3218
10,000+$0.3065
- +
Ext. Price(USD):$26.44
MOQ:53
Mult:1
SPQ:1
Sullins Connector Solutions
Package:SMD,P=2.54mm
ECAD Model:
13-Pin 2.54mm Connector 3A Tin Black SMD P=2.54mm
Available Stock
4,000
Estimated Ship Time:9-14 working days
10+$0.6901
100+$0.5867
500+$0.5236
1,000+$0.4986
- +
Ext. Price(USD):$26.22
MOQ:38
Mult:1
SPQ:1
16-Pin Header, Push-Pull, 2A, Gold, Black, SMD, 2mm Pitch
Available Stock
416
Estimated Ship Time:9-14 working days
1+$1.5552
26+$1.2308
5,018+$0.8489
10,010+$0.8086
- +
Ext. Price(USD):$26.43
MOQ:17
Mult:1
SPQ:1
Pin Header, 2-Pin, 2.54mm Pitch, 3A, Tin-Plated, Black, TH, 5.08mm × 2.54mm × 2.54mm
Available Stock
511
Estimated Ship Time:9-14 working days
10+$0.4471
100+$0.3799
500+$0.3391
- +
Ext. Price(USD):$26.37
MOQ:59
Mult:1
SPQ:1
Pin Header, 8-Pin 2.54mm Pitch 2-Row TH 3A 2.54μm Tin Black 10.2mm × 2.54mm × 6.1mm
Available Stock
723
Estimated Ship Time:9-14 working days
10+$0.6178
100+$0.5252
5,000+$0.3985
10,000+$0.3794
- +
Ext. Price(USD):$26.56
MOQ:43
Mult:1
SPQ:1
Breakaway Header, 4-Pin, 2.54mm Pitch, Push-Pull, 3A, 250nm, Gold/Black, TH
Available Stock
6,426
Estimated Ship Time:9-14 working days
10+$0.4514
100+$0.3832
5,000+$0.2907
10,000+$0.2768
- +
Ext. Price(USD):$26.18
MOQ:58
Mult:1
SPQ:1
Pin Header, TH, 12-Pin, 2.54mm Pitch, 2 Pos, 3A, Gold Plated, Black, 250nm
Available Stock
1,039
Estimated Ship Time:9-14 working days
10+$1.8155
100+$1.5428
500+$1.3771
1,000+$1.3113
5,000+$1.1707
- +
Ext. Price(USD):$27.23
MOQ:15
Mult:1
SPQ:1
Header, 36 Pin, 2.54mm Pitch, Breakaway, Push-Pull, 3A, Gold, Black, TH
Available Stock
163
Estimated Ship Time:9-14 working days
1+$4.0068
50+$3.0354
100+$2.8904
500+$2.5801
1,000+$2.457
- +
Ext. Price(USD):$28.04
MOQ:7
Mult:1
SPQ:1
34-Pin Header, Breakaway, Push-Pull, 3A, Gold Plated, Black, TH
Available Stock
7,751
Estimated Ship Time:9-14 working days
10+$0.5681
100+$0.4831
5,000+$0.3664
10,000+$0.349
- +
Ext. Price(USD):$26.13
MOQ:46
Mult:1
SPQ:1
1-Pin Breakaway Header, Push-Pull, 3A, Gold, Black, TH
Available Stock
8,700
Estimated Ship Time:9-14 working days
1,000+$0.0222
5,000+$0.0198
10,000+$0.0189
- +
Ext. Price(USD):$26.01
MOQ:1,172
Mult:1
SPQ:1
Header, 14-Pin, 2.54mm Pitch, Push-Pull, 3A, Gold, Black, SMD
Available Stock
2,746
Estimated Ship Time:9-14 working days
1+$1.7712
23+$1.4223
5,014+$0.9727
10,005+$0.9265
- +
Ext. Price(USD):$26.56
MOQ:15
Mult:1
SPQ:1
25 / PageGoto