Male Pin Headers

Results:

Male pin headers provide exposed male contacts for connecting a PCB to a female socket, cable connector or another board. Select a compatible part by matching pitch, positions, rows, orientation and mounting method first, then verify mating-post length, PCB termination, plating, current rating and mechanical retention.

Start with the PCB Interface

Begin with the PCB layout rather than the connector appearance. Confirm the contact pitch, total number of positions, number of rows and row spacing. The footprint must also support the required through-hole or surface-mount termination and provide sufficient clearance for the connector body and its mating component.

Selection Parameter What to Check Why It Matters
Pitch Center-to-center contact spacing Controls PCB footprint and mating compatibility
Positions and Rows Total contacts, single or dual row, and loaded positions Determines circuit count and connector size
Orientation Vertical or right-angle mating direction Affects enclosure access and board-edge placement
Mounting Method Through-hole or surface-mount termination Defines the PCB layout and assembly process

Build the Required Header Geometry

After defining the footprint, compare the dimensions above and below the insulator. The mating-post length must provide sufficient engagement with the female contact without bottoming out. The PCB-tail length must suit the board thickness, hole design or SMT pad pattern. Insulator height and overall contact length determine the available clearance around the connection.

  • Mating-post length: the exposed male contact available for insertion.
  • PCB-tail length: the portion soldered or terminated to the board.
  • Insulator height: the plastic body height above the PCB.
  • Pin cross-section: the contact width and thickness accepted by the mating socket.
  • Overall length: the complete contact dimension used when comparing alternatives.

Choose Orientation and Mounting

Vertical headers support perpendicular mating above the PCB, while right-angle headers route the connection toward the board edge. Through-hole products provide strong mechanical retention and require compatible finished-hole dimensions. Surface-mount headers reduce the need for plated holes but require a suitable land pattern, adequate coplanarity and stable placement during reflow.

Shrouded, keyed or locking headers can add polarization and retention when the application must reduce misalignment or accidental disconnection. Confirm these mechanical features against the complete connector series rather than relying only on pitch and pin count.

Match the Female Connector

A compatible female connector must match the pitch, positions, rows and contact arrangement of the male header. Also verify the accepted pin cross-section, minimum and maximum mating depth, polarization, keying and contact plating. Browse Female Socket Headers when selecting the corresponding receptacle or socket side.

Check Electrical and Mechanical Requirements

Compare current and voltage ratings, contact resistance, insulation resistance, operating temperature and contact plating. Gold-plated mating surfaces may suit frequent mating or low-level signals, while tin-plated contacts are commonly used for cost-sensitive applications with fewer mating cycles. Environmental conditions, vibration and required retention should also be considered.

For a complete review of pitch, mounting, pin dimensions, datasheets and alternative-part evaluation, refer to the PCB Pin Header Selection Guide.

Choose the Correct Header Category

  • Use male pin headers for conventional exposed male contacts mounted on a PCB.
  • Browse Special Pin Headers when the design requires unusual pin lengths, custom row arrangements or non-standard geometry.
  • Consider Board Stacking Connectors for elevated boards, pass-through contacts or controlled board-to-board spacing.

Prepare a Replacement Checklist

Before approving an alternative, record the pitch, positions, rows, row spacing, orientation, mounting method, mating-post length, PCB-tail length, insulator height, pin cross-section, plating, electrical ratings and mating connector. Confirm the manufacturer drawing and recommended PCB footprint because parts with similar descriptions may have different mechanical dimensions.

Read More
Male Pin HeadersResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
METZ CONNECT
Package:SMD,P=2mm(Horizontal SMD)
ECAD Model:
10-Pin Header, Push-Pull, Gold/Black, SMD, P=2mm (Horizontal Mount)
Available Stock
1,017
Estimated Ship Time:9-14 working days
10+$0.6944
100+$0.5904
5,000+$0.448
10,000+$0.4266
- +
Ext. Price(USD):$26.38
MOQ:38
Mult:1
SPQ:1
METZ CONNECT
Package:SMD,P=2mm(Horizontal SMD)
ECAD Model:
4-Pin Header, Push-Pull, Gold, Black, SMD, P=2mm
Available Stock
1,180
Estimated Ship Time:9-14 working days
100+$0.256
500+$0.2284
1,000+$0.2175
5,000+$0.1941
10,000+$0.1848
- +
Ext. Price(USD):$26.11
MOQ:102
Mult:1
SPQ:1
METZ CONNECT
Package:SMD,P=1.27mm
ECAD Model:
8-Pin Header 1.27mm Pitch 2 Rows Push-Pull Gold Black SMD P=1.27mm
Available Stock
111
Estimated Ship Time:9-14 working days
10+$0.4763
100+$0.405
5,000+$0.3072
10,000+$0.2926
- +
Ext. Price(USD):$26.19
MOQ:55
Mult:1
SPQ:1
METZ CONNECT
Package:SMD,P=2mm(Horizontal SMD)
ECAD Model:
6-Pin 2mm Header, Push-Pull Gold Black SMD P=2mm Horizontal Mount
Available Stock
2,063
Estimated Ship Time:9-14 working days
10+$0.4622
100+$0.3929
5,000+$0.298
10,000+$0.2838
- +
Ext. Price(USD):$26.34
MOQ:57
Mult:1
SPQ:1
METZ CONNECT
Package:SMD,P=2.54mm
ECAD Model:
8-Pin Header, Push-Pull, Gold, Black, SMD, P=2.54mm
Available Stock
2,354
Estimated Ship Time:9-14 working days
10+$0.4169
100+$0.3543
5,000+$0.2688
10,000+$0.2559
- +
Ext. Price(USD):$26.26
MOQ:63
Mult:1
SPQ:1
METZ CONNECT
Package:SMD,P=2mm(Horizontal SMD)
ECAD Model:
8-Pin Header, Push-Pull, Gold, Black, SMD, P=2mm (Horizontal), SMD
Available Stock
665
Estimated Ship Time:9-14 working days
10+$0.567
100+$0.4818
5,000+$0.3655
10,000+$0.3481
- +
Ext. Price(USD):$26.08
MOQ:46
Mult:1
SPQ:1
Header, 1-Pin, Black, 79μm (2.00mm)
Available Stock
367
Estimated Ship Time:9-14 working days
100+$0.1609
500+$0.1436
1,000+$0.1367
5,000+$0.1221
10,000+$0.1162
- +
Ext. Price(USD):$26.06
MOQ:162
Mult:1
SPQ:1
6-Pin Header 2mm Pitch Push-Pull 1A Gold Black TH
Available Stock
2,285
Estimated Ship Time:9-14 working days
100+$0.1156
500+$0.1031
1,000+$0.0982
5,000+$0.0876
10,000+$0.0835
- +
Ext. Price(USD):$26.01
MOQ:225
Mult:1
SPQ:1
METZ CONNECT
Package:SMD,P=2mm
ECAD Model:
8-Pin 2mm Header Push-Pull Gold Black SMD P=2mm
Available Stock
3,133
Estimated Ship Time:9-14 working days
10+$0.4525
100+$0.3849
5,000+$0.2919
10,000+$0.278
- +
Ext. Price(USD):$26.24
MOQ:58
Mult:1
SPQ:1
METZ CONNECT
Package:SMD,P=2.54mm(Horizontal SMD)
ECAD Model:
4-Pin Header, Push-Pull, Gold/Black SMD, P=2.54mm
Available Stock
413
Estimated Ship Time:9-14 working days
100+$0.2576
500+$0.2299
1,000+$0.2189
5,000+$0.1954
10,000+$0.1861
- +
Ext. Price(USD):$26.01
MOQ:101
Mult:1
SPQ:1
Header, 2.00mm Pitch, Black, 2 Pos
Available Stock
826
Estimated Ship Time:9-14 working days
10+$0.31
100+$0.2632
500+$0.2349
- +
Ext. Price(USD):$26.04
MOQ:84
Mult:1
SPQ:1
METZ CONNECT
Package:SMD,P=1.27mm
ECAD Model:
6-Pin 1.27mm Header, Push-Pull, Gold/Black, SMD, P=1.27mm
Available Stock
1,526
Estimated Ship Time:9-14 working days
10+$0.3629
100+$0.3088
5,000+$0.2342
10,000+$0.223
- +
Ext. Price(USD):$26.12
MOQ:72
Mult:1
SPQ:1
10-Pin Header, Push-Pull, 1.27mm Pitch, Gold Plated, Black, TH
Available Stock
5,001
Estimated Ship Time:6-13 working days
10+$0.3864
100+$0.3146
5,000+$0.2333
10,000+$0.2225
- +
Ext. Price(USD):$14.29
MOQ:37
Mult:1
SPQ:1
METZ CONNECT
Package:SMD,P=2mm(Horizontal SMD)
ECAD Model:
6-Pin Header, Push-Pull, Gold/Black, SMD, P=2mm (Horizontal)
Available Stock
2,016
Estimated Ship Time:9-14 working days
10+$0.4633
100+$0.3933
5,000+$0.2983
10,000+$0.268
- +
Ext. Price(USD):$26.40
MOQ:57
Mult:1
SPQ:1
8-Pin Header, Push-Pull, Gold Plated, Black, TH, 2.54mm Pitch
Available Stock
4,063
Estimated Ship Time:6-13 working days
100+$0.0978
250+$0.0874
5,000+$0.068
10,000+$0.0648
- +
Ext. Price(USD):$14.08
MOQ:144
Mult:1
SPQ:1
4-Pin 1.27mm Header, Push-Pull, Gold/Black TH
Available Stock
313
Estimated Ship Time:9-14 working days
100+$0.1503
500+$0.1342
1,000+$0.1278
5,000+$0.1141
10,000+$0.1086
- +
Ext. Price(USD):$26.00
MOQ:173
Mult:1
SPQ:1
METZ CONNECT
Package:SMD,P=2mm
ECAD Model:
6-Pin 2mm Header, Push-Pull, Gold Plated, Black, SMD, P=2mm
Available Stock
3,014
Estimated Ship Time:9-14 working days
10+$0.3694
100+$0.3134
500+$0.2797
1,000+$0.2663
5,000+$0.2243
- +
Ext. Price(USD):$26.22
MOQ:71
Mult:1
SPQ:1
50μm (1.27mm) 1 Header Black TH
Available Stock
38,280
Estimated Ship Time:9-14 working days
100+$0.175
500+$0.1561
1,000+$0.1487
5,000+$0.1327
10,000+$0.1264
- +
Ext. Price(USD):$26.07
MOQ:149
Mult:1
SPQ:1
6-Pin 1.27mm 2-Pos 1.27mm Header, Push-Pull Gold Black TH
Available Stock
11,338
Estimated Ship Time:9-14 working days
100+$0.1845
500+$0.1646
1,000+$0.1568
5,000+$0.1399
10,000+$0.1332
- +
Ext. Price(USD):$26.01
MOQ:141
Mult:1
SPQ:1
25 / PageGoto