Male Pin Headers

Results:

Male pin headers provide exposed male contacts for connecting a PCB to a female socket, cable connector or another board. Select a compatible part by matching pitch, positions, rows, orientation and mounting method first, then verify mating-post length, PCB termination, plating, current rating and mechanical retention.

Start with the PCB Interface

Begin with the PCB layout rather than the connector appearance. Confirm the contact pitch, total number of positions, number of rows and row spacing. The footprint must also support the required through-hole or surface-mount termination and provide sufficient clearance for the connector body and its mating component.

Selection Parameter What to Check Why It Matters
Pitch Center-to-center contact spacing Controls PCB footprint and mating compatibility
Positions and Rows Total contacts, single or dual row, and loaded positions Determines circuit count and connector size
Orientation Vertical or right-angle mating direction Affects enclosure access and board-edge placement
Mounting Method Through-hole or surface-mount termination Defines the PCB layout and assembly process

Build the Required Header Geometry

After defining the footprint, compare the dimensions above and below the insulator. The mating-post length must provide sufficient engagement with the female contact without bottoming out. The PCB-tail length must suit the board thickness, hole design or SMT pad pattern. Insulator height and overall contact length determine the available clearance around the connection.

  • Mating-post length: the exposed male contact available for insertion.
  • PCB-tail length: the portion soldered or terminated to the board.
  • Insulator height: the plastic body height above the PCB.
  • Pin cross-section: the contact width and thickness accepted by the mating socket.
  • Overall length: the complete contact dimension used when comparing alternatives.

Choose Orientation and Mounting

Vertical headers support perpendicular mating above the PCB, while right-angle headers route the connection toward the board edge. Through-hole products provide strong mechanical retention and require compatible finished-hole dimensions. Surface-mount headers reduce the need for plated holes but require a suitable land pattern, adequate coplanarity and stable placement during reflow.

Shrouded, keyed or locking headers can add polarization and retention when the application must reduce misalignment or accidental disconnection. Confirm these mechanical features against the complete connector series rather than relying only on pitch and pin count.

Match the Female Connector

A compatible female connector must match the pitch, positions, rows and contact arrangement of the male header. Also verify the accepted pin cross-section, minimum and maximum mating depth, polarization, keying and contact plating. Browse Female Socket Headers when selecting the corresponding receptacle or socket side.

Check Electrical and Mechanical Requirements

Compare current and voltage ratings, contact resistance, insulation resistance, operating temperature and contact plating. Gold-plated mating surfaces may suit frequent mating or low-level signals, while tin-plated contacts are commonly used for cost-sensitive applications with fewer mating cycles. Environmental conditions, vibration and required retention should also be considered.

For a complete review of pitch, mounting, pin dimensions, datasheets and alternative-part evaluation, refer to the PCB Pin Header Selection Guide.

Choose the Correct Header Category

  • Use male pin headers for conventional exposed male contacts mounted on a PCB.
  • Browse Special Pin Headers when the design requires unusual pin lengths, custom row arrangements or non-standard geometry.
  • Consider Board Stacking Connectors for elevated boards, pass-through contacts or controlled board-to-board spacing.

Prepare a Replacement Checklist

Before approving an alternative, record the pitch, positions, rows, row spacing, orientation, mounting method, mating-post length, PCB-tail length, insulator height, pin cross-section, plating, electrical ratings and mating connector. Confirm the manufacturer drawing and recommended PCB footprint because parts with similar descriptions may have different mechanical dimensions.

Read More
Male Pin HeadersResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Header, 4-Pin, 2.54mm Pitch, Push-Pull, 3A, Gold Plated, SMD
Available Stock
6,409
Estimated Ship Time:9-14 working days
10+$0.2927
100+$0.2927
- +
Ext. Price(USD):$26.05
MOQ:89
Mult:1
SPQ:1
Header, 10-Pin, 2.54mm Pitch, 2 Pos, Push-Pull, 3A, Gold Plated, TH
Available Stock
10,055
Estimated Ship Time:9-14 working days
100+$0.2166
500+$0.1934
1,000+$0.1841
5,000+$0.1643
10,000+$0.1565
- +
Ext. Price(USD):$26.20
MOQ:121
Mult:1
SPQ:1
Header 16-Pin 2.54mm Pitch 2-Row Push-Pull 3A Gold SMD
Available Stock
13,220
Estimated Ship Time:9-14 working days
10+$1.3662
100+$1.1606
- +
Ext. Price(USD):$27.32
MOQ:20
Mult:1
SPQ:1
8-Pin 2.54mm 2x2.54mm Header, Push-Pull 3A Gold Plated, SMD
Available Stock
8,619
Estimated Ship Time:9-14 working days
10+$0.5098
100+$0.4328
- +
Ext. Price(USD):$26.50
MOQ:52
Mult:1
SPQ:1
16-Pin Header, Push-Pull, 2A, Gold Plated, SMD
Available Stock
13,230
Estimated Ship Time:9-14 working days
10+$0.567
100+$0.4818
- +
Ext. Price(USD):$26.08
MOQ:46
Mult:1
SPQ:1
4-Pin Header, Push-Pull, 2A, Gold Plated, SMD, 2mm Pitch
Available Stock
9,750
Estimated Ship Time:9-14 working days
10+$0.2851
100+$0.2851
- +
Ext. Price(USD):$26.22
MOQ:92
Mult:1
SPQ:1
8-Pin Header, 2mm Pitch, Push-Pull, 2A, Gold Plated, SMD
Available Stock
5,807
Estimated Ship Time:9-14 working days
10+$0.3694
100+$0.3136
- +
Ext. Price(USD):$26.22
MOQ:71
Mult:1
SPQ:1
4-Pin Header, Push-Pull 3A Gold TH 2.54mm Pitch
Available Stock
8,568
Estimated Ship Time:9-14 working days
100+$0.0791
500+$0.0706
1,000+$0.0672
5,000+$0.06
10,000+$0.0571
- +
Ext. Price(USD):$26.02
MOQ:329
Mult:1
SPQ:1
Header 20-Pin 1.27mm Pitch Push-Pull 1A Gold Plated SMD
Available Stock
9,462
Estimated Ship Time:9-14 working days
10+$1.336
100+$1.1353
500+$1.0133
- +
Ext. Price(USD):$26.72
MOQ:20
Mult:1
SPQ:1
Header 6-Pin 2mm Pitch, Push-Pull 2A Gold Plated SMD
Available Stock
8,350
Estimated Ship Time:9-14 working days
10+$0.3769
100+$0.3203
- +
Ext. Price(USD):$26.00
MOQ:69
Mult:1
SPQ:1
Header, 6-Pin, 2mm Pitch, Push-Pull, 2A, Gold Plated, TH
Available Stock
8,594
Estimated Ship Time:9-14 working days
100+$0.1331
500+$0.1187
1,000+$0.113
5,000+$0.1009
10,000+$0.0961
- +
Ext. Price(USD):$26.08
MOQ:196
Mult:1
SPQ:1
Header 4-Pin 2mm Pitch Push-Pull 2A Gold Plated TH
Available Stock
9,963
Estimated Ship Time:9-14 working days
100+$0.0895
500+$0.0799
1,000+$0.0761
5,000+$0.0679
10,000+$0.0647
- +
Ext. Price(USD):$26.04
MOQ:291
Mult:1
SPQ:1
Header, Push-Pull, 10-Pin, 2mm Pitch, 2-Pos, 2mm, 2A, Gold, TH
Available Stock
9,578
Estimated Ship Time:9-14 working days
100+$0.2219
500+$0.198
1,000+$0.1886
5,000+$0.1683
10,000+$0.1603
- +
Ext. Price(USD):$26.18
MOQ:118
Mult:1
SPQ:1
12-Pin Header, 2.54mm Pitch, Push-Pull, 3A, Gold Plated, TH
Available Stock
7,731
Estimated Ship Time:9-14 working days
10+$0.3186
100+$0.2703
5,000+$0.205
10,000+$0.1952
- +
Ext. Price(USD):$26.12
MOQ:82
Mult:1
SPQ:1
4-Pin Header, Push-Pull 3A Gold TH 2.54mm Pitch
Available Stock
10,000
Estimated Ship Time:9-14 working days
500+$0.0493
1,000+$0.0469
5,000+$0.0419
10,000+$0.0399
- +
Ext. Price(USD):$26.03
MOQ:528
Mult:1
SPQ:1
Header, Push-Pull, 2A, Gold Plated, SMD, 10-Pin, 2mm Pitch
Available Stock
9,071
Estimated Ship Time:9-14 working days
10+$0.5648
100+$0.4796
- +
Ext. Price(USD):$26.54
MOQ:47
Mult:1
SPQ:1
8-Pin 2.54mm 2 2.54mm Header Push-Pull 3A Gold TH
Available Stock
7,275
Estimated Ship Time:9-14 working days
100+$0.1321
500+$0.1179
1,000+$0.1123
5,000+$0.1002
10,000+$0.0954
- +
Ext. Price(USD):$26.02
MOQ:197
Mult:1
SPQ:1
6pin 2.54mm 2 2.54mm Header,Push-Pull 3A gold SMD mount
Available Stock
9,780
Estimated Ship Time:9-14 working days
10+$0.4352
100+$0.3699
- +
Ext. Price(USD):$26.11
MOQ:60
Mult:1
SPQ:1
Header, Push-Pull, 2A, Gold Plated, SMD, 10-Pin, 2mm Pitch
Available Stock
10,128
Estimated Ship Time:9-14 working days
10+$0.5314
100+$0.4519
- +
Ext. Price(USD):$26.03
MOQ:49
Mult:1
SPQ:1
8-Pin 2mm Header, Push-Pull 2A Gold Plated TH
Available Stock
9,596
Estimated Ship Time:9-14 working days
100+$0.2094
500+$0.1869
1,000+$0.178
5,000+$0.1588
10,000+$0.1513
- +
Ext. Price(USD):$26.17
MOQ:125
Mult:1
SPQ:1
10-Pin Header 2.54mm Pitch 2.54mm Push-Pull 3A Gold Plated SMD
Available Stock
9,835
Estimated Ship Time:9-14 working days
10+$0.6934
100+$0.589
- +
Ext. Price(USD):$26.34
MOQ:38
Mult:1
SPQ:1
25 / PageGoto