Male Pin Headers

Results:

Male pin headers provide exposed male contacts for connecting a PCB to a female socket, cable connector or another board. Select a compatible part by matching pitch, positions, rows, orientation and mounting method first, then verify mating-post length, PCB termination, plating, current rating and mechanical retention.

Start with the PCB Interface

Begin with the PCB layout rather than the connector appearance. Confirm the contact pitch, total number of positions, number of rows and row spacing. The footprint must also support the required through-hole or surface-mount termination and provide sufficient clearance for the connector body and its mating component.

Selection Parameter What to Check Why It Matters
Pitch Center-to-center contact spacing Controls PCB footprint and mating compatibility
Positions and Rows Total contacts, single or dual row, and loaded positions Determines circuit count and connector size
Orientation Vertical or right-angle mating direction Affects enclosure access and board-edge placement
Mounting Method Through-hole or surface-mount termination Defines the PCB layout and assembly process

Build the Required Header Geometry

After defining the footprint, compare the dimensions above and below the insulator. The mating-post length must provide sufficient engagement with the female contact without bottoming out. The PCB-tail length must suit the board thickness, hole design or SMT pad pattern. Insulator height and overall contact length determine the available clearance around the connection.

  • Mating-post length: the exposed male contact available for insertion.
  • PCB-tail length: the portion soldered or terminated to the board.
  • Insulator height: the plastic body height above the PCB.
  • Pin cross-section: the contact width and thickness accepted by the mating socket.
  • Overall length: the complete contact dimension used when comparing alternatives.

Choose Orientation and Mounting

Vertical headers support perpendicular mating above the PCB, while right-angle headers route the connection toward the board edge. Through-hole products provide strong mechanical retention and require compatible finished-hole dimensions. Surface-mount headers reduce the need for plated holes but require a suitable land pattern, adequate coplanarity and stable placement during reflow.

Shrouded, keyed or locking headers can add polarization and retention when the application must reduce misalignment or accidental disconnection. Confirm these mechanical features against the complete connector series rather than relying only on pitch and pin count.

Match the Female Connector

A compatible female connector must match the pitch, positions, rows and contact arrangement of the male header. Also verify the accepted pin cross-section, minimum and maximum mating depth, polarization, keying and contact plating. Browse Female Socket Headers when selecting the corresponding receptacle or socket side.

Check Electrical and Mechanical Requirements

Compare current and voltage ratings, contact resistance, insulation resistance, operating temperature and contact plating. Gold-plated mating surfaces may suit frequent mating or low-level signals, while tin-plated contacts are commonly used for cost-sensitive applications with fewer mating cycles. Environmental conditions, vibration and required retention should also be considered.

For a complete review of pitch, mounting, pin dimensions, datasheets and alternative-part evaluation, refer to the PCB Pin Header Selection Guide.

Choose the Correct Header Category

  • Use male pin headers for conventional exposed male contacts mounted on a PCB.
  • Browse Special Pin Headers when the design requires unusual pin lengths, custom row arrangements or non-standard geometry.
  • Consider Board Stacking Connectors for elevated boards, pass-through contacts or controlled board-to-board spacing.

Prepare a Replacement Checklist

Before approving an alternative, record the pitch, positions, rows, row spacing, orientation, mounting method, mating-post length, PCB-tail length, insulator height, pin cross-section, plating, electrical ratings and mating connector. Confirm the manufacturer drawing and recommended PCB footprint because parts with similar descriptions may have different mechanical dimensions.

Read More
Male Pin HeadersResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
2.54mm Pitch SMD Single Row Pin Header 9-Pin Vertical Mount
In Stock270
2506+
10+$0.0493
100+$0.0394
5,000+$0.025
10,000+$0.0235
- +
Ext. Price(USD):$0.49
MOQ:10
Mult:10
SPQ:1,000
DEALON
Package:SMD,P=2.54mm,Horizontal SMD(Staggered Pins)
ECAD Model:
2.54mm Pitch SMD Pin Header, 2-Pin, Vertical
In Stock2,112
2605+
20+$0.0226
200+$0.0176
10,000+$0.0112
20,000+$0.0105
- +
Ext. Price(USD):$0.45
MOQ:20
Mult:10
SPQ:2,500
DEALON
Package:SMD,P=1.27mm
ECAD Model:
Pitch 1.27mm Dual Row Header SMD 2×5=10-Pin Vertical Mount
In Stock4,309
2605+
5+$0.1028
50+$0.0821
2,000+$0.055
4,000+$0.0519
- +
Ext. Price(USD):$0.51
MOQ:5
Mult:5
SPQ:2,000
DEALON
Package:SMD,P=2.54mm(Staggered Pins)
ECAD Model:
Pitch 2.54mm SMD Dual Row Header, 2x3=6Pins/Pos, Vertical
In Stock2,990
2506+
10+$0.0497
100+$0.0393
300+$0.0335
- +
Ext. Price(USD):$0.49
MOQ:10
Mult:10
SPQ:1,500
1.27mm Pitch Single Row Header 6-Pin Through Hole / Pin Header
In Stock1,070
2511+
10+$0.035
100+$0.0277
4,000+$0.0174
10,000+$0.0163
- +
Ext. Price(USD):$0.35
MOQ:10
Mult:10
SPQ:2,000
DEALON
Package:SMD,P=2.54mm(Staggered Pins)
ECAD Model:
Pin Header, 2.54mm Pitch, 4-Pin, SMD, Vertical
In Stock656
2610+
10+$0.0426
100+$0.0337
4,000+$0.0225
10,000+$0.0212
- +
Ext. Price(USD):$0.42
MOQ:10
Mult:10
SPQ:2,000
Pin Header, 2.54mm Pitch, 4-Pin, SMD, Vertical
In Stock2,560
2607+
20+$0.022
200+$0.0169
10,000+$0.0106
20,000+$0.0098
- +
Ext. Price(USD):$0.44
MOQ:20
Mult:10
SPQ:2,000
Pin Header, 2-Pin, 1.27mm Pitch, Through Hole
In Stock1,635
2606+
50+$0.0146
500+$0.0113
2,000+$0.0088
- +
Ext. Price(USD):$0.73
MOQ:50
Mult:10
SPQ:2,000
TH 1A
In Stock2,446
2605+
20+$0.0257
200+$0.0201
10,000+$0.0126
20,000+$0.0118
- +
Ext. Price(USD):$0.51
MOQ:20
Mult:20
SPQ:2,000
DEALON
Package:SMD,P=1.27mm
ECAD Model:
Pin Header, Double Row, 2x3=6 Pos, Pitch 1.27mm, SMD, Vertical Mount
In Stock3,479
2506+
10+$0.0594
100+$0.0458
6,000+$0.0297
9,000+$0.0278
- +
Ext. Price(USD):$0.59
MOQ:10
Mult:10
SPQ:3,000
DEALON
Package:SMD,P=2.54mm(Staggered Pins)
ECAD Model:
Pin Header, Pitch 2.54mm, SMD, Single Row, 5-Pin, Vertical Mount
In Stock2,190
2506+
10+$0.0403
100+$0.0316
4,500+$0.0204
10,500+$0.0191
- +
Ext. Price(USD):$0.40
MOQ:10
Mult:10
SPQ:1,500
DEALON
Package:SMD,P=2.54mm(Staggered Pins)
ECAD Model:
2.54mm Pitch Dual Row SMD Header 2×2=4-Pin/Pos Vertical
In Stock398
2516+
10+$0.037
100+$0.0293
4,500+$0.0195
10,500+$0.0183
- +
Ext. Price(USD):$0.37
MOQ:10
Mult:10
SPQ:1,500
DEALON
Package:SMD,P=2.54mm(Staggered Pins)
ECAD Model:
Pin Header, Pitch 2.54mm, SMD, Single Row, 3-Pin, Vertical Mount
In Stock1,630
2607+
20+$0.0334
200+$0.0255
10,000+$0.0165
20,000+$0.0154
- +
Ext. Price(USD):$0.66
MOQ:20
Mult:10
SPQ:2,500
Pin Header, Pitch 2.54mm, SMD, Single Row, 3-Pin, Vertical Mount
In Stock3,518
2514+
20+$0.0182
200+$0.0142
10,000+$0.0087
20,000+$0.0081
- +
Ext. Price(USD):$0.36
MOQ:20
Mult:10
SPQ:2,000
1.27mm Pitch TH Double Row Header, 2x6=12-Pin
In Stock1,777
2506+
10+$0.0642
100+$0.0504
4,000+$0.0315
10,000+$0.0295
- +
Ext. Price(USD):$0.64
MOQ:10
Mult:10
SPQ:2,000
DEALON
Package:SMD,P=2.54mm
ECAD Model:
Pitch 2.54mm SMD Dual Row Receptacle 2×2=4Pin/Pos Vertical Mount
In Stock676
2606+
5+$0.1265
50+$0.0998
2,500+$0.0664
5,000+$0.0627
- +
Ext. Price(USD):$0.63
MOQ:5
Mult:5
SPQ:500
DEALON
Package:SMD,P=2.54mm
ECAD Model:
2.54mm Pitch, SMD Double Row Receptacle, 2x3=6Pins/Pos, Vertical
In Stock600
2605+
5+$0.1649
50+$0.129
2,450+$0.0842
4,900+$0.079
- +
Ext. Price(USD):$0.82
MOQ:5
Mult:5
SPQ:350
Header Receptacle, 2.54mm Pitch, Single Row, 6-Pos, Right Angle
In Stock245
2510+
5+$0.0741
50+$0.0571
2,400+$0.0431
5,000+$0.0407
- +
Ext. Price(USD):$0.37
MOQ:5
Mult:5
SPQ:200
2.54mm Pitch TH Header, 4-Pin, Straight
In Stock662
2512+
10+$0.0556
100+$0.0443
5,000+$0.0285
10,000+$0.0269
- +
Ext. Price(USD):$0.55
MOQ:10
Mult:10
SPQ:500
In Stock1,000
2602+
1+$0.058
10+$0.0463
300+$0.0322
1,000+$0.0304
- +
Ext. Price(USD):$0.05
MOQ:1
Mult:1
SPQ:1,000
In Stock500
2602+
1+$0.0938
10+$0.0748
300+$0.0521
500+$0.049
- +
Ext. Price(USD):$0.09
MOQ:1
Mult:1
SPQ:500
DEALON
ECAD Model:
Through-Hole Mount
In Stock690
2602+
100+$0.0057
1,000+$0.0045
50,000+$0.0029
100,000+$0.0027
- +
Ext. Price(USD):$0.57
MOQ:100
Mult:1
SPQ:2,000
TH 3A
In Stock500
2603+
1+$0.0793
10+$0.0633
300+$0.0441
500+$0.0415
- +
Ext. Price(USD):$0.07
MOQ:1
Mult:1
SPQ:500
TH 3A
In Stock800
2603+
10+$0.0534
100+$0.043
4,800+$0.0283
9,600+$0.0268
- +
Ext. Price(USD):$0.53
MOQ:10
Mult:1
SPQ:800
TVS Diode 3A
In Stock1,500
2602+
20+$0.029
200+$0.0229
10,500+$0.0145
19,500+$0.0136
- +
Ext. Price(USD):$0.58
MOQ:20
Mult:1
SPQ:1,500
25 / PageGoto