Male Pin Headers

Results:

Male pin headers provide exposed male contacts for connecting a PCB to a female socket, cable connector or another board. Select a compatible part by matching pitch, positions, rows, orientation and mounting method first, then verify mating-post length, PCB termination, plating, current rating and mechanical retention.

Start with the PCB Interface

Begin with the PCB layout rather than the connector appearance. Confirm the contact pitch, total number of positions, number of rows and row spacing. The footprint must also support the required through-hole or surface-mount termination and provide sufficient clearance for the connector body and its mating component.

Selection Parameter What to Check Why It Matters
Pitch Center-to-center contact spacing Controls PCB footprint and mating compatibility
Positions and Rows Total contacts, single or dual row, and loaded positions Determines circuit count and connector size
Orientation Vertical or right-angle mating direction Affects enclosure access and board-edge placement
Mounting Method Through-hole or surface-mount termination Defines the PCB layout and assembly process

Build the Required Header Geometry

After defining the footprint, compare the dimensions above and below the insulator. The mating-post length must provide sufficient engagement with the female contact without bottoming out. The PCB-tail length must suit the board thickness, hole design or SMT pad pattern. Insulator height and overall contact length determine the available clearance around the connection.

  • Mating-post length: the exposed male contact available for insertion.
  • PCB-tail length: the portion soldered or terminated to the board.
  • Insulator height: the plastic body height above the PCB.
  • Pin cross-section: the contact width and thickness accepted by the mating socket.
  • Overall length: the complete contact dimension used when comparing alternatives.

Choose Orientation and Mounting

Vertical headers support perpendicular mating above the PCB, while right-angle headers route the connection toward the board edge. Through-hole products provide strong mechanical retention and require compatible finished-hole dimensions. Surface-mount headers reduce the need for plated holes but require a suitable land pattern, adequate coplanarity and stable placement during reflow.

Shrouded, keyed or locking headers can add polarization and retention when the application must reduce misalignment or accidental disconnection. Confirm these mechanical features against the complete connector series rather than relying only on pitch and pin count.

Match the Female Connector

A compatible female connector must match the pitch, positions, rows and contact arrangement of the male header. Also verify the accepted pin cross-section, minimum and maximum mating depth, polarization, keying and contact plating. Browse Female Socket Headers when selecting the corresponding receptacle or socket side.

Check Electrical and Mechanical Requirements

Compare current and voltage ratings, contact resistance, insulation resistance, operating temperature and contact plating. Gold-plated mating surfaces may suit frequent mating or low-level signals, while tin-plated contacts are commonly used for cost-sensitive applications with fewer mating cycles. Environmental conditions, vibration and required retention should also be considered.

For a complete review of pitch, mounting, pin dimensions, datasheets and alternative-part evaluation, refer to the PCB Pin Header Selection Guide.

Choose the Correct Header Category

  • Use male pin headers for conventional exposed male contacts mounted on a PCB.
  • Browse Special Pin Headers when the design requires unusual pin lengths, custom row arrangements or non-standard geometry.
  • Consider Board Stacking Connectors for elevated boards, pass-through contacts or controlled board-to-board spacing.

Prepare a Replacement Checklist

Before approving an alternative, record the pitch, positions, rows, row spacing, orientation, mounting method, mating-post length, PCB-tail length, insulator height, pin cross-section, plating, electrical ratings and mating connector. Confirm the manufacturer drawing and recommended PCB footprint because parts with similar descriptions may have different mechanical dimensions.

Read More
Male Pin HeadersResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Header, 6-Pin, 1mm Pitch, Latch Lock, 203nm, Gold Plated, SMD
In Stock3,090
2525+
1+$0.3705
10+$0.3067
100+$0.2824
500+$0.2616
1,000+$0.2437
- +
Ext. Price(USD):$0.37
MOQ:1
Mult:1
SPQ:1,500
7-Pin 1.25mm Header, 1 Detent Lock, 1A, Tin, Beige, TH
In Stock1,780
2629+
1+$1.0583
10+$0.8824
30+$0.7829
100+$0.6752
- +
Ext. Price(USD):$1.05
MOQ:1
Mult:1
SPQ:100
Header 4-Pin 2mm Latch Holder 2A Tin Black TH
In Stock5,000
2641+
5+$0.3383
50+$0.2711
200+$0.2408
500+$0.2052
- +
Ext. Price(USD):$1.69
MOQ:5
Mult:1
SPQ:100
Hirose Electric
Package:SMD,P=1.25mm
ECAD Model:
20-Pin Header 1.25mm Pitch Push-Pull 1A Gold SMD P=1.25mm SMD 29.95mm L × 6.7mm H
In Stock999
2625+
1+$1.1949
10+$0.9777
100+$0.8962
500+$0.8273
1,000+$0.7682
- +
Ext. Price(USD):$1.19
MOQ:1
Mult:1
SPQ:1,000
Hirose DF11 Series 2.0mm Pitch 10-Pin Double Row Header, Board-to-Board/Wire-to-Board Connector, Straight, TH
In Stock11
2629+
5+$0.259
50+$0.2055
150+$0.1833
500+$0.1556
- +
Ext. Price(USD):$1.29
MOQ:5
Mult:1
SPQ:100
Hirose DF11 Series, 2.0mm Pitch, 10-Pin Double Row Header, Board-to-Board/Wire-to-Board, Right Angle, TH
In Stock18
2630+
1+$0.399
10+$0.3156
30+$0.2794
100+$0.2339
- +
Ext. Price(USD):$0.39
MOQ:1
Mult:1
SPQ:40
12-Pin 2.5mm 2 2.5mm Header Push-Pull 3A 203nm Gold White TH 17.5mm L × 8.6mm H
In Stock1,195
2621+
1+$0.8301
10+$0.6792
100+$0.6226
500+$0.5747
1,000+$0.5336
- +
Ext. Price(USD):$0.83
MOQ:1
Mult:1
SPQ:100
Header, 5-Pin, 2.5mm Pitch, Push-Pull, 3A, Tin Plated, White, TH
In Stock248
2627+
5+$0.2018
50+$0.1599
200+$0.1421
500+$0.1199
- +
Ext. Price(USD):$1.00
MOQ:5
Mult:1
SPQ:100
20-Pin Header, 2mm Pitch, 2A/5A, Tin, SMD
In Stock1
2342+
1+$2.0221
10+$1.6544
100+$1.3999
500+$1.2999
1,000+$1.2132
- +
Ext. Price(USD):$2.02
MOQ:1
Mult:1
SPQ:300
8-Pin Header, Latch Holder, 2A, 1μm Tin Plated, Black, TH, 2mm Pitch
In Stock665
2636+
1+$0.7247
10+$0.5914
30+$0.5237
270+$0.4574
540+$0.4177
- +
Ext. Price(USD):$0.72
MOQ:1
Mult:1
SPQ:270
Header 40-Pin 1.25mm Pitch 2-Row 1.25mm Detent Lock 1A Gold SMD 203nm
In Stock1,884
2632+
1+$1.5307
10+$1.2924
500+$0.9546
1,000+$0.9251
- +
Ext. Price(USD):$1.53
MOQ:1
Mult:1
SPQ:1,000
12-Pin Header, Latch Holder, 2A, Tin-Plated, Black, TH, 2mm Pitch
In Stock260
2609+
1+$0.7598
10+$0.7336
100+$0.7076
300+$0.6926
- +
Ext. Price(USD):$0.75
MOQ:1
Mult:1
SPQ:100
Hirose Electric
Package:SMD,P=1.25mm,
ECAD Model:
20-Pin Header, 1.25mm Pitch, Detent Lock, 1A, Gold, Beige, SMD
In Stock2,125
2603+
1+$1.1114
10+$0.8893
100+$0.7409
500+$0.6839
1,000+$0.6351
- +
Ext. Price(USD):$1.11
MOQ:1
Mult:1
SPQ:1,000
Automotive Connectors
In Stock98
2641+
1+$1.0126
10+$0.8285
100+$0.7595
500+$0.7011
1,000+$0.651
- +
Ext. Price(USD):$1.01
MOQ:1
Mult:1
SPQ:108
Hirose DF11 Series 2.0mm Pitch 16P Double Row Header, Board-to-Board/Wire-to-Board Connector, Right Angle, TH
In Stock7
2628+
1+$1.4167
10+$1.1591
100+$1.0625
500+$0.9808
1,000+$0.9107
- +
Ext. Price(USD):$1.41
MOQ:1
Mult:1
SPQ:100
Hirose Electric
Package:SMD,P=1mm,Horizontal SMD
ECAD Model:
12-Pin Header, 2mm Pitch, SMD, Tin-Plated, 2A/5A, 1mm P, Horizontal Mount, 22.52mm × 14.8mm × 8.84mm
In Stock186
2604+
1+$1.4323
10+$1.1719
100+$1.0742
500+$0.9916
1,000+$0.9208
- +
Ext. Price(USD):$1.43
MOQ:1
Mult:1
SPQ:300
Header, 3-Pin, 2.5mm Pitch, Push-Pull, 3A, Gold Plated, White, TH, 10mm × 5mm × 5.7mm
In Stock22
2526+
1+$0.3021
10+$0.2472
100+$0.2266
500+$0.2092
1,000+$0.1942
- +
Ext. Price(USD):$0.30
MOQ:1
Mult:1
SPQ:100
Hirose 2.5mm Pitch 3-Pin Header Wire-to-Board DF1E Series Right Angle TH
In Stock16
2615+
1+$0.4894
10+$0.4005
100+$0.3671
500+$0.3389
1,000+$0.3146
- +
Ext. Price(USD):$0.48
MOQ:1
Mult:1
SPQ:100
Hirose Electric
Package:SMD,P=2.2mm
ECAD Model:
2 Pin 2.2mm 1 4A SMD, P=2.2mm, 5.1mm L
In Stock1,527
2531+
5+$0.3266
50+$0.259
3,000+$0.1769
6,000+$0.1673
- +
Ext. Price(USD):$1.63
MOQ:5
Mult:1
SPQ:3,000
Hirose Electric
Package:SMD,P=1.2mm
ECAD Model:
Hirose 1.2mm Pitch 5P Single Row Header Wire-to-Board Connector, DF57 Series, Right Angle, Surface Mount
In Stock3,710
2637+
1+$0.3759
10+$0.3075
100+$0.2819
500+$0.2602
1,000+$0.2416
- +
Ext. Price(USD):$0.37
MOQ:1
Mult:1
SPQ:5,000
Hirose DF58 Series Wire-to-Board Connector, 2P, 1.2mm Pitch, Right Angle, SMD
In Stock4,500
2540+
1+$0.2696
10+$0.2206
100+$0.2022
500+$0.1867
1,000+$0.1733
- +
Ext. Price(USD):$0.26
MOQ:1
Mult:1
SPQ:6,000
20-Pin Header, 1mm Pitch, Push-Pull, 1A, Gold Plated, SMD, 12.3mm L × 6.4mm H
In Stock989
2635+
1+$1.1156
10+$0.9128
100+$0.8367
500+$0.7724
1,000+$0.7172
- +
Ext. Price(USD):$1.11
MOQ:1
Mult:1
SPQ:1,000
30-Pin 1.25mm 2-Channel 1.25mm Detent Lock Header 1A 203nm Gold Beige SMD 24.9mm(L) × 6.9mm(H)
In Stock564
2505+
1+$2.0453
10+$1.5336
100+$1.3633
500+$1.2272
1,000+$1.1156
- +
Ext. Price(USD):$2.04
MOQ:1
Mult:1
SPQ:1,000
6-Pin Header, 2mm Pitch, Latch Holder, 2A, Tin-Plated, Black, TH
In Stock180
2643+
1+$0.5454
10+$0.4303
500+$0.2972
1,000+$0.2808
- +
Ext. Price(USD):$0.54
MOQ:1
Mult:1
SPQ:100
Hirose DF11 Series, 2.0mm Pitch, 20P Double Row Header, Board-to-Board/Wire-to-Board, Right Angle, Thru-Hole
In Stock1,000
2617+
1+$2.2344
10+$2.0699
100+$1.9166
500+$1.8253
1,000+$1.7384
- +
Ext. Price(USD):$2.23
MOQ:1
Mult:1
SPQ:100
25 / PageGoto