Male Pin Headers

Results:

Male pin headers provide exposed male contacts for connecting a PCB to a female socket, cable connector or another board. Select a compatible part by matching pitch, positions, rows, orientation and mounting method first, then verify mating-post length, PCB termination, plating, current rating and mechanical retention.

Start with the PCB Interface

Begin with the PCB layout rather than the connector appearance. Confirm the contact pitch, total number of positions, number of rows and row spacing. The footprint must also support the required through-hole or surface-mount termination and provide sufficient clearance for the connector body and its mating component.

Selection Parameter What to Check Why It Matters
Pitch Center-to-center contact spacing Controls PCB footprint and mating compatibility
Positions and Rows Total contacts, single or dual row, and loaded positions Determines circuit count and connector size
Orientation Vertical or right-angle mating direction Affects enclosure access and board-edge placement
Mounting Method Through-hole or surface-mount termination Defines the PCB layout and assembly process

Build the Required Header Geometry

After defining the footprint, compare the dimensions above and below the insulator. The mating-post length must provide sufficient engagement with the female contact without bottoming out. The PCB-tail length must suit the board thickness, hole design or SMT pad pattern. Insulator height and overall contact length determine the available clearance around the connection.

  • Mating-post length: the exposed male contact available for insertion.
  • PCB-tail length: the portion soldered or terminated to the board.
  • Insulator height: the plastic body height above the PCB.
  • Pin cross-section: the contact width and thickness accepted by the mating socket.
  • Overall length: the complete contact dimension used when comparing alternatives.

Choose Orientation and Mounting

Vertical headers support perpendicular mating above the PCB, while right-angle headers route the connection toward the board edge. Through-hole products provide strong mechanical retention and require compatible finished-hole dimensions. Surface-mount headers reduce the need for plated holes but require a suitable land pattern, adequate coplanarity and stable placement during reflow.

Shrouded, keyed or locking headers can add polarization and retention when the application must reduce misalignment or accidental disconnection. Confirm these mechanical features against the complete connector series rather than relying only on pitch and pin count.

Match the Female Connector

A compatible female connector must match the pitch, positions, rows and contact arrangement of the male header. Also verify the accepted pin cross-section, minimum and maximum mating depth, polarization, keying and contact plating. Browse Female Socket Headers when selecting the corresponding receptacle or socket side.

Check Electrical and Mechanical Requirements

Compare current and voltage ratings, contact resistance, insulation resistance, operating temperature and contact plating. Gold-plated mating surfaces may suit frequent mating or low-level signals, while tin-plated contacts are commonly used for cost-sensitive applications with fewer mating cycles. Environmental conditions, vibration and required retention should also be considered.

For a complete review of pitch, mounting, pin dimensions, datasheets and alternative-part evaluation, refer to the PCB Pin Header Selection Guide.

Choose the Correct Header Category

  • Use male pin headers for conventional exposed male contacts mounted on a PCB.
  • Browse Special Pin Headers when the design requires unusual pin lengths, custom row arrangements or non-standard geometry.
  • Consider Board Stacking Connectors for elevated boards, pass-through contacts or controlled board-to-board spacing.

Prepare a Replacement Checklist

Before approving an alternative, record the pitch, positions, rows, row spacing, orientation, mounting method, mating-post length, PCB-tail length, insulator height, pin cross-section, plating, electrical ratings and mating connector. Confirm the manufacturer drawing and recommended PCB footprint because parts with similar descriptions may have different mechanical dimensions.

Read More
Male Pin HeadersResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
ZHOURI
ECAD Model:
Pin Header 1x50P 1.27mm 7.2mm H 1U
Available Stock
1,000
Estimated Ship Time:7-12 working days
25+
200+$0.1116
400+$0.1097
600+$0.1069
800+$0.1042
- +
Ext. Price(USD):$22.32
MOQ:200
Mult:200
SPQ:200
Pin Header 1x4, Pitch 2.54mm, Length 14mm, Right Angle, 0.4U
Available Stock
5,000
Estimated Ship Time:7-12 working days
25+
2,000+$0.0159
4,000+$0.0157
6,000+$0.0153
8,000+$0.0149
- +
Ext. Price(USD):$31.80
MOQ:2,000
Mult:1,000
SPQ:1,000
ZHOURI
Package:SMD,P=2.54mm
ECAD Model:
Pin Header, 2x4 Pos, 2.54mm Pitch, SMT, 0.8U
Available Stock
2,000
Estimated Ship Time:7-12 working days
25+
800+$0.0271
1,600+$0.0267
2,400+$0.026
3,200+$0.0252
- +
Ext. Price(USD):$21.68
MOQ:800
Mult:400
SPQ:400
ZHOURI
ECAD Model:
Pin Header 2x20 2.0mm L=8.7mm 0.8mm
Available Stock
500
Estimated Ship Time:7-12 working days
25+
500+$0.0478
1,000+$0.047
1,500+$0.0458
2,000+$0.0446
- +
Ext. Price(USD):$23.90
MOQ:500
Mult:100
SPQ:100
ZHOURI
ECAD Model:
Pin Header 2x5 2.54mm L=14mm Right Angle 0.4mm Pitch
Available Stock
2,500
Estimated Ship Time:7-12 working days
25+
1,000+$0.0239
2,000+$0.0235
3,000+$0.0228
4,000+$0.0223
- +
Ext. Price(USD):$23.90
MOQ:1,000
Mult:500
SPQ:500
ZHOURI
ECAD Model:
Pin Header 1x2 2.0mm L=8.7mm 0.8μm
Available Stock
25,000
Estimated Ship Time:7-12 working days
25+
5,000+$0.0064
10,000+$0.0063
15,000+$0.0061
20,000+$0.006
- +
Ext. Price(USD):$32.00
MOQ:5,000
Mult:5,000
SPQ:5,000
Pin Header 1x20 2.54mm L=14mm Right Angle 0.4U
Available Stock
1,000
Estimated Ship Time:7-12 working days
25+
400+$0.0542
800+$0.0533
1,200+$0.0519
1,600+$0.0506
- +
Ext. Price(USD):$21.68
MOQ:400
Mult:200
SPQ:200
ZHOURI
ECAD Model:
Pin Header 2x30 2.0mm Pitch L=8.7mm 0.8U
Available Stock
500
Estimated Ship Time:7-12 working days
25+
300+$0.0669
600+$0.0658
900+$0.0642
1,200+$0.0624
- +
Ext. Price(USD):$20.07
MOQ:300
Mult:100
SPQ:100
ZHOURI
ECAD Model:
Pin Header 1x40, 2.0mm Pitch, L=8.7mm, 0.8U
Available Stock
1,000
Estimated Ship Time:7-12 working days
25+
600+$0.0494
1,200+$0.0486
1,800+$0.0473
2,400+$0.0461
- +
Ext. Price(USD):$29.64
MOQ:600
Mult:200
SPQ:200
ZHOURI
ECAD Model:
Pin Header 2x4 2.54mm L=14mm Right Angle 0.4U
Available Stock
2,500
Estimated Ship Time:7-12 working days
25+
1,000+$0.0303
2,000+$0.0297
3,000+$0.0289
4,000+$0.0283
- +
Ext. Price(USD):$30.30
MOQ:1,000
Mult:500
SPQ:500
Pin Header 2x20 2.54mm L=14mm Right Angle 0.4U
Available Stock
500
Estimated Ship Time:7-12 working days
25+
200+$0.1116
400+$0.1097
600+$0.1069
800+$0.1042
- +
Ext. Price(USD):$22.32
MOQ:200
Mult:100
SPQ:100
ZHOURI
Package:SMD,P=2.54mm
ECAD Model:
Pin Header 2x10 2.54mm SMT 0.8U
Available Stock
1,000
Estimated Ship Time:7-12 working days
25+
400+$0.0637
800+$0.0627
1,200+$0.0611
1,600+$0.0595
- +
Ext. Price(USD):$25.48
MOQ:400
Mult:200
SPQ:200
ZHOURI
Package:SMD,P=2.54mm
ECAD Model:
Pin Header, SMT, 2x20 Pos 2.54mm Pitch 0.8mm H
Available Stock
500
Estimated Ship Time:7-12 working days
25+
200+$0.1116
400+$0.1097
600+$0.1069
800+$0.1042
- +
Ext. Price(USD):$22.32
MOQ:200
Mult:100
SPQ:100
ZHOURI
ECAD Model:
Pin Header 2x8P 2.54mm 11.6mm RoHS
Available Stock
1,500
Estimated Ship Time:7-12 working days
25+
600+$0.0382
1,200+$0.0376
1,800+$0.0366
2,400+$0.0358
- +
Ext. Price(USD):$22.92
MOQ:600
Mult:300
SPQ:300
Pin Header, 1x40P, 2.54mm Pitch, 20mm Length, ROHS
Available Stock
500
Estimated Ship Time:7-12 working days
25+
300+$0.0957
600+$0.0941
900+$0.0917
1,200+$0.0893
- +
Ext. Price(USD):$28.71
MOQ:300
Mult:100
SPQ:100
ZHOURI
ECAD Model:
Pin Header 1x5, 2.54mm, L=14mm, Right Angle, 0.4μm
Available Stock
5,000
Estimated Ship Time:7-12 working days
25+
2,000+$0.0143
4,000+$0.0141
6,000+$0.0137
8,000+$0.0135
- +
Ext. Price(USD):$28.60
MOQ:2,000
Mult:1,000
SPQ:1,000
ZHOURI
ECAD Model:
Header 1x10 2.54mm 11.6mm ROHS
Available Stock
2,500
Estimated Ship Time:7-12 working days
25+
1,000+$0.0239
2,000+$0.0235
3,000+$0.0228
4,000+$0.0223
- +
Ext. Price(USD):$23.90
MOQ:1,000
Mult:500
SPQ:500
ZHOURI
ECAD Model:
Pin Header 1x40P 2.54mm 11.6mm RoHS
Available Stock
1,000
Estimated Ship Time:7-12 working days
25+
400+$0.0829
800+$0.0815
1,200+$0.0794
1,600+$0.0773
- +
Ext. Price(USD):$33.16
MOQ:400
Mult:200
SPQ:200
Pin Header 1x40 2.54mm 17mm ROHS
Available Stock
500
Estimated Ship Time:7-12 working days
25+
300+$0.0988
600+$0.0973
900+$0.0947
1,200+$0.0922
- +
Ext. Price(USD):$29.64
MOQ:300
Mult:100
SPQ:100
Pin Header 2x8P 2.54mm 11.2mm RoHS
Available Stock
1,500
Estimated Ship Time:7-12 working days
25+
900+$0.0255
1,800+$0.0251
2,700+$0.0244
3,600+$0.0238
- +
Ext. Price(USD):$22.95
MOQ:900
Mult:300
SPQ:300
Pin Header, 1x9P, 2.54mm Pitch, 11.2mm H, ROHS
Available Stock
2,500
Estimated Ship Time:7-12 working days
25+
1,000+$0.0239
2,000+$0.0235
3,000+$0.0228
4,000+$0.0223
- +
Ext. Price(USD):$23.90
MOQ:1,000
Mult:500
SPQ:500
Pin Header 2x3P 2.54mm 11.2mm RoHS
Available Stock
5,000
Estimated Ship Time:7-12 working days
25+
2,000+$0.0159
4,000+$0.0157
6,000+$0.0153
8,000+$0.0149
- +
Ext. Price(USD):$31.80
MOQ:2,000
Mult:1,000
SPQ:1,000
ZHOURI
ECAD Model:
Pin Header 2x40P 2.54mm 11.6mm H ROHS
Available Stock
500
Estimated Ship Time:7-12 working days
25+
200+$0.1435
400+$0.1411
600+$0.1374
800+$0.1339
- +
Ext. Price(USD):$28.70
MOQ:200
Mult:100
SPQ:100
Pin Header 1x40 2.54mm 21mm, RoHS
Available Stock
500
Estimated Ship Time:7-12 working days
25+
200+$0.1116
400+$0.1097
600+$0.1069
800+$0.1042
- +
Ext. Price(USD):$22.32
MOQ:200
Mult:100
SPQ:100
Pin Header 1x40, Pitch 2.54mm, 15mm L, RoHS
Available Stock
1,000
Estimated Ship Time:7-12 working days
25+
400+$0.0829
800+$0.0815
1,200+$0.0794
1,600+$0.0773
- +
Ext. Price(USD):$33.16
MOQ:400
Mult:200
SPQ:200
25 / PageGoto