Male Pin Headers

Results:

Male pin headers provide exposed male contacts for connecting a PCB to a female socket, cable connector or another board. Select a compatible part by matching pitch, positions, rows, orientation and mounting method first, then verify mating-post length, PCB termination, plating, current rating and mechanical retention.

Start with the PCB Interface

Begin with the PCB layout rather than the connector appearance. Confirm the contact pitch, total number of positions, number of rows and row spacing. The footprint must also support the required through-hole or surface-mount termination and provide sufficient clearance for the connector body and its mating component.

Selection Parameter What to Check Why It Matters
Pitch Center-to-center contact spacing Controls PCB footprint and mating compatibility
Positions and Rows Total contacts, single or dual row, and loaded positions Determines circuit count and connector size
Orientation Vertical or right-angle mating direction Affects enclosure access and board-edge placement
Mounting Method Through-hole or surface-mount termination Defines the PCB layout and assembly process

Build the Required Header Geometry

After defining the footprint, compare the dimensions above and below the insulator. The mating-post length must provide sufficient engagement with the female contact without bottoming out. The PCB-tail length must suit the board thickness, hole design or SMT pad pattern. Insulator height and overall contact length determine the available clearance around the connection.

  • Mating-post length: the exposed male contact available for insertion.
  • PCB-tail length: the portion soldered or terminated to the board.
  • Insulator height: the plastic body height above the PCB.
  • Pin cross-section: the contact width and thickness accepted by the mating socket.
  • Overall length: the complete contact dimension used when comparing alternatives.

Choose Orientation and Mounting

Vertical headers support perpendicular mating above the PCB, while right-angle headers route the connection toward the board edge. Through-hole products provide strong mechanical retention and require compatible finished-hole dimensions. Surface-mount headers reduce the need for plated holes but require a suitable land pattern, adequate coplanarity and stable placement during reflow.

Shrouded, keyed or locking headers can add polarization and retention when the application must reduce misalignment or accidental disconnection. Confirm these mechanical features against the complete connector series rather than relying only on pitch and pin count.

Match the Female Connector

A compatible female connector must match the pitch, positions, rows and contact arrangement of the male header. Also verify the accepted pin cross-section, minimum and maximum mating depth, polarization, keying and contact plating. Browse Female Socket Headers when selecting the corresponding receptacle or socket side.

Check Electrical and Mechanical Requirements

Compare current and voltage ratings, contact resistance, insulation resistance, operating temperature and contact plating. Gold-plated mating surfaces may suit frequent mating or low-level signals, while tin-plated contacts are commonly used for cost-sensitive applications with fewer mating cycles. Environmental conditions, vibration and required retention should also be considered.

For a complete review of pitch, mounting, pin dimensions, datasheets and alternative-part evaluation, refer to the PCB Pin Header Selection Guide.

Choose the Correct Header Category

  • Use male pin headers for conventional exposed male contacts mounted on a PCB.
  • Browse Special Pin Headers when the design requires unusual pin lengths, custom row arrangements or non-standard geometry.
  • Consider Board Stacking Connectors for elevated boards, pass-through contacts or controlled board-to-board spacing.

Prepare a Replacement Checklist

Before approving an alternative, record the pitch, positions, rows, row spacing, orientation, mounting method, mating-post length, PCB-tail length, insulator height, pin cross-section, plating, electrical ratings and mating connector. Confirm the manufacturer drawing and recommended PCB footprint because parts with similar descriptions may have different mechanical dimensions.

Read More
Male Pin HeadersResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Pin Header 2x40P 2.54mm 14mm RoHS
Available Stock
250
Estimated Ship Time:7-12 working days
25+
200+$0.1275
400+$0.1254
600+$0.1222
800+$0.119
- +
Ext. Price(USD):$25.50
MOQ:200
Mult:50
SPQ:50
Pin Header 2x40P 2.54mm 13mm ROHS
Available Stock
250
Estimated Ship Time:7-12 working days
25+
200+$0.1116
400+$0.1097
600+$0.1069
800+$0.1042
- +
Ext. Price(USD):$22.32
MOQ:200
Mult:50
SPQ:50
Pin Header, 2x40P 2.54mm Pitch 21mm Length RoHS
Available Stock
250
Estimated Ship Time:7-12 working days
25+
100+$0.239
200+$0.235
300+$0.2291
400+$0.2231
- +
Ext. Price(USD):$23.90
MOQ:100
Mult:50
SPQ:50
Pin Header 2x40P 2.54mm 15mm ROHS
Available Stock
250
Estimated Ship Time:7-12 working days
25+
150+$0.1514
300+$0.1488
450+$0.145
600+$0.1413
- +
Ext. Price(USD):$22.71
MOQ:150
Mult:50
SPQ:50
Pin Header, 1x40P, 2.54mm, 16mm, RoHS
Available Stock
500
Estimated Ship Time:7-12 working days
25+
300+$0.0796
600+$0.0783
900+$0.0764
1,200+$0.0743
- +
Ext. Price(USD):$23.88
MOQ:300
Mult:100
SPQ:100
Pin Header 2x40P 2.54mm 23mm RoHS
Available Stock
250
Estimated Ship Time:7-12 working days
25+
100+$0.271
200+$0.2665
300+$0.2596
400+$0.2529
- +
Ext. Price(USD):$27.10
MOQ:100
Mult:50
SPQ:50
Pin Header 1x40P 2.54mm 13mm RoHS
Available Stock
1,000
Estimated Ship Time:7-12 working days
25+
400+$0.0701
800+$0.0689
1,200+$0.0672
1,600+$0.0655
- +
Ext. Price(USD):$28.04
MOQ:400
Mult:200
SPQ:200
Pin Header, 2x40P, 2.54mm Pitch, 11.2mm H, ROHS
Available Stock
500
Estimated Ship Time:7-12 working days
25+
300+$0.0957
600+$0.0941
900+$0.0917
1,200+$0.0893
- +
Ext. Price(USD):$28.71
MOQ:300
Mult:100
SPQ:100
Pin Header, 2x40P, 2.54mm Pitch, 25mm Length, ROHS
Available Stock
250
Estimated Ship Time:7-12 working days
25+
100+$0.2869
200+$0.2821
300+$0.275
400+$0.2678
- +
Ext. Price(USD):$28.69
MOQ:100
Mult:50
SPQ:50
Pin Header 2x4P 2.54mm 11.2mm ROHS
Available Stock
2,500
Estimated Ship Time:7-12 working days
25+
1,500+$0.0175
3,000+$0.0173
4,500+$0.0169
6,000+$0.0164
- +
Ext. Price(USD):$26.25
MOQ:1,500
Mult:500
SPQ:500
Pin Header 2x40P 2.54mm 19mm ROHS
Available Stock
250
Estimated Ship Time:7-12 working days
25+
150+$0.1912
300+$0.1881
450+$0.1833
600+$0.1785
- +
Ext. Price(USD):$28.68
MOQ:150
Mult:50
SPQ:50
Pin Header 2x40P 2.54mm 17mm RoHS
Available Stock
250
Estimated Ship Time:7-12 working days
25+
150+$0.1594
300+$0.1567
450+$0.1527
600+$0.1488
- +
Ext. Price(USD):$23.91
MOQ:150
Mult:50
SPQ:50
Pin Header 1x40P 2.54mm 18mm RoHS
Available Stock
500
Estimated Ship Time:7-12 working days
25+
300+$0.0861
600+$0.0846
900+$0.0825
1,200+$0.0804
- +
Ext. Price(USD):$25.83
MOQ:300
Mult:100
SPQ:100
Pin Header 1x40P 2.54mm 25mm RoHS
Available Stock
500
Estimated Ship Time:7-12 working days
25+
200+$0.1196
400+$0.1175
600+$0.1145
800+$0.1116
- +
Ext. Price(USD):$23.92
MOQ:200
Mult:100
SPQ:100
Pin Header 2x40P, 2.54mm Pitch, 8.7mm Height, RoHS
Available Stock
500
Estimated Ship Time:7-12 working days
25+
300+$0.0877
600+$0.0862
900+$0.084
1,200+$0.0818
- +
Ext. Price(USD):$26.31
MOQ:300
Mult:100
SPQ:100
ZHOURI
ECAD Model:
Pin Header, 2x10P, 2.54mm Pitch, 11.6mm L, RoHS
Available Stock
1,000
Estimated Ship Time:7-12 working days
25+
600+$0.0414
1,200+$0.0408
1,800+$0.0397
2,400+$0.0387
- +
Ext. Price(USD):$24.84
MOQ:600
Mult:200
SPQ:200
Pin Header 2x40 2.54 Pitch L=14mm Right Angle 0.4U
Available Stock
500
Estimated Ship Time:7-12 working days
25+
200+$0.1658
400+$0.1629
600+$0.1588
800+$0.1547
- +
Ext. Price(USD):$33.16
MOQ:200
Mult:100
SPQ:100
Pin Header 1x5 L 2.54mm 14mm Right Angle 0.4U
Available Stock
5,000
Estimated Ship Time:7-12 working days
25+
2,000+$0.0191
4,000+$0.0188
6,000+$0.0183
8,000+$0.0178
- +
Ext. Price(USD):$38.20
MOQ:2,000
Mult:1,000
SPQ:1,000
ZHOURI
Package:SMD,P=2.54mm
ECAD Model:
Pin Header 2x40 2.54mm SMT 0.8U
Available Stock
500
Estimated Ship Time:7-12 working days
25+
100+$0.2231
200+$0.2194
300+$0.2138
400+$0.2082
- +
Ext. Price(USD):$22.31
MOQ:100
Mult:100
SPQ:100
ZHOURI
ECAD Model:
Pin Header 2x40 2.0mm Pitch L=8.7mm 0.8mm Height
Available Stock
500
Estimated Ship Time:7-12 working days
25+
300+$0.0765
600+$0.0751
900+$0.0733
1,200+$0.0714
- +
Ext. Price(USD):$22.95
MOQ:300
Mult:100
SPQ:100
Pin Header 1x10 Pitch 2.54mm Length 14mm Right Angle 0.4U
Available Stock
1,500
Estimated Ship Time:7-12 working days
25+
900+$0.0287
1,800+$0.0281
2,700+$0.0275
3,600+$0.0268
- +
Ext. Price(USD):$25.83
MOQ:900
Mult:300
SPQ:300
ZHOURI
ECAD Model:
Pin Header 1x12P 2.54mm 11.6mm RoHS
Available Stock
2,500
Estimated Ship Time:7-12 working days
25+
1,000+$0.0303
2,000+$0.0297
3,000+$0.0289
4,000+$0.0283
- +
Ext. Price(USD):$30.30
MOQ:1,000
Mult:500
SPQ:500
Pin Header 2x10 2.54mm L14mm Right Angle 0.4U
Available Stock
1,000
Estimated Ship Time:7-12 working days
25+
400+$0.0558
800+$0.0549
1,200+$0.0534
1,600+$0.052
- +
Ext. Price(USD):$22.32
MOQ:400
Mult:200
SPQ:200
ZHOURI
ECAD Model:
Pin Header 2x10 2.0mm L=8.7mm 0.8U
Available Stock
1,000
Estimated Ship Time:7-12 working days
25+
800+$0.0287
1,600+$0.0281
2,400+$0.0275
3,200+$0.0268
- +
Ext. Price(USD):$22.96
MOQ:800
Mult:200
SPQ:200
ZHOURI
ECAD Model:
Pin Header 1x6 2.54mm Pitch L=14mm Right Angle 0.4U
Available Stock
2,500
Estimated Ship Time:7-12 working days
25+
1,500+$0.0175
3,000+$0.0173
4,500+$0.0169
6,000+$0.0164
- +
Ext. Price(USD):$26.25
MOQ:1,500
Mult:500
SPQ:500
25 / PageGoto