Male Pin Headers

Results:

Male pin headers provide exposed male contacts for connecting a PCB to a female socket, cable connector or another board. Select a compatible part by matching pitch, positions, rows, orientation and mounting method first, then verify mating-post length, PCB termination, plating, current rating and mechanical retention.

Start with the PCB Interface

Begin with the PCB layout rather than the connector appearance. Confirm the contact pitch, total number of positions, number of rows and row spacing. The footprint must also support the required through-hole or surface-mount termination and provide sufficient clearance for the connector body and its mating component.

Selection Parameter What to Check Why It Matters
Pitch Center-to-center contact spacing Controls PCB footprint and mating compatibility
Positions and Rows Total contacts, single or dual row, and loaded positions Determines circuit count and connector size
Orientation Vertical or right-angle mating direction Affects enclosure access and board-edge placement
Mounting Method Through-hole or surface-mount termination Defines the PCB layout and assembly process

Build the Required Header Geometry

After defining the footprint, compare the dimensions above and below the insulator. The mating-post length must provide sufficient engagement with the female contact without bottoming out. The PCB-tail length must suit the board thickness, hole design or SMT pad pattern. Insulator height and overall contact length determine the available clearance around the connection.

  • Mating-post length: the exposed male contact available for insertion.
  • PCB-tail length: the portion soldered or terminated to the board.
  • Insulator height: the plastic body height above the PCB.
  • Pin cross-section: the contact width and thickness accepted by the mating socket.
  • Overall length: the complete contact dimension used when comparing alternatives.

Choose Orientation and Mounting

Vertical headers support perpendicular mating above the PCB, while right-angle headers route the connection toward the board edge. Through-hole products provide strong mechanical retention and require compatible finished-hole dimensions. Surface-mount headers reduce the need for plated holes but require a suitable land pattern, adequate coplanarity and stable placement during reflow.

Shrouded, keyed or locking headers can add polarization and retention when the application must reduce misalignment or accidental disconnection. Confirm these mechanical features against the complete connector series rather than relying only on pitch and pin count.

Match the Female Connector

A compatible female connector must match the pitch, positions, rows and contact arrangement of the male header. Also verify the accepted pin cross-section, minimum and maximum mating depth, polarization, keying and contact plating. Browse Female Socket Headers when selecting the corresponding receptacle or socket side.

Check Electrical and Mechanical Requirements

Compare current and voltage ratings, contact resistance, insulation resistance, operating temperature and contact plating. Gold-plated mating surfaces may suit frequent mating or low-level signals, while tin-plated contacts are commonly used for cost-sensitive applications with fewer mating cycles. Environmental conditions, vibration and required retention should also be considered.

For a complete review of pitch, mounting, pin dimensions, datasheets and alternative-part evaluation, refer to the PCB Pin Header Selection Guide.

Choose the Correct Header Category

  • Use male pin headers for conventional exposed male contacts mounted on a PCB.
  • Browse Special Pin Headers when the design requires unusual pin lengths, custom row arrangements or non-standard geometry.
  • Consider Board Stacking Connectors for elevated boards, pass-through contacts or controlled board-to-board spacing.

Prepare a Replacement Checklist

Before approving an alternative, record the pitch, positions, rows, row spacing, orientation, mounting method, mating-post length, PCB-tail length, insulator height, pin cross-section, plating, electrical ratings and mating connector. Confirm the manufacturer drawing and recommended PCB footprint because parts with similar descriptions may have different mechanical dimensions.

Read More
Male Pin HeadersResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Pin Header 2x5P 2.54mm 11.2mm H RoHS
In Stock500
2630+
10+$0.0428
100+$0.0353
6,000+$0.0238
10,000+$0.0224
- +
Ext. Price(USD):$0.42
MOQ:10
Mult:1
SPQ:500
ZHOURI
ECAD Model:
Pin Header 1×4 2.54mm L=14mm Right Angle 0.4U
In Stock1,658
2630+
20+$0.0244
200+$0.0202
12,000+$0.0142
20,000+$0.0128
- +
Ext. Price(USD):$0.48
MOQ:20
Mult:1
SPQ:1,000
ZHOURI
ECAD Model:
Pin Header 1x4 2.0mm L=8.7mm 0.8U
In Stock2,000
2632+
20+$0.0273
200+$0.0215
10,000+$0.014
20,000+$0.013
- +
Ext. Price(USD):$0.54
MOQ:20
Mult:1
SPQ:2,000
Pin Header 1x40, Pitch 2.54mm, Length 14mm, Right Angle, 0.4U
In Stock200
2630+
5+$0.1832
50+$0.1514
3,000+$0.1017
5,000+$0.0959
- +
Ext. Price(USD):$0.91
MOQ:5
Mult:1
SPQ:200
ZHOURI
ECAD Model:
Pin Header, 2x6P, 2.54mm Pitch, 11.6mm H, RoHS
In Stock596
2632+
5+$0.058
50+$0.048
3,000+$0.0322
5,000+$0.0304
- +
Ext. Price(USD):$0.29
MOQ:5
Mult:1
SPQ:300
ZHOURI
Package:SMD,P=2.54mm
ECAD Model:
Pin Header 2x2 2.54mm SMT, 0.8mm H
In Stock1,500
2630+
10+$0.0366
100+$0.0302
6,000+$0.0203
10,000+$0.0191
- +
Ext. Price(USD):$0.36
MOQ:10
Mult:1
SPQ:1,500
Pin Header 1x6 L 2.54mm 14mm Right Angle 0.4U
In Stock1,000
2630+
10+$0.0428
100+$0.0353
6,000+$0.0238
10,000+$0.0224
- +
Ext. Price(USD):$0.42
MOQ:10
Mult:1
SPQ:1,000
ZHOURI
ECAD Model:
Pin Header 2x25P 2.54mm 11.6mm ROHS
In Stock50
2630+
5+$0.1832
50+$0.1514
3,000+$0.1017
5,000+$0.0959
- +
Ext. Price(USD):$0.91
MOQ:5
Mult:1
SPQ:50
ZHOURI
ECAD Model:
Pin Header 2x20P 2.54mm 11.6mm RoHS
In Stock3,494
2630+
5+$0.1694
50+$0.1362
2,500+$0.0859
5,000+$0.0813
- +
Ext. Price(USD):$0.84
MOQ:5
Mult:1
SPQ:100
ZHOURI
ECAD Model:
Pin Header 1x3 2.54mm L=14mm Right Angle 0.4U
In Stock1,500
2630+
20+$0.0211
200+$0.0176
12,000+$0.0123
20,000+$0.0111
- +
Ext. Price(USD):$0.42
MOQ:20
Mult:1
SPQ:1,500
ZHOURI
ECAD Model:
Pin Header 2x5 2.0mm L=8.7mm 0.8U
In Stock485
2630+
10+$0.0398
100+$0.0329
6,000+$0.0221
10,000+$0.0208
- +
Ext. Price(USD):$0.39
MOQ:10
Mult:1
SPQ:500
ZHOURI
Package:SMD,P=2.54mm
ECAD Model:
Pin Header 2x5 2.54mm SMD 0.8mm H
In Stock500
2630+
5+$0.0671
50+$0.0554
3,000+$0.0372
5,000+$0.0351
- +
Ext. Price(USD):$0.33
MOQ:5
Mult:1
SPQ:500
ZHOURI
ECAD Model:
Pin Header, 1x7P, 2.54mm, 11.6mm, RoHS
In Stock178
2630+
10+$0.0335
100+$0.0277
6,000+$0.0186
10,000+$0.0176
- +
Ext. Price(USD):$0.33
MOQ:10
Mult:1
SPQ:200
ZHOURI
ECAD Model:
Pin Header 1x2P 2.54mm 11.6mm ROHS
In Stock16,865
2630+
50+$0.015
500+$0.012
24,000+$0.0071
51,000+$0.0067
- +
Ext. Price(USD):$0.75
MOQ:50
Mult:1
SPQ:2,000
ZHOURI
ECAD Model:
Pin Header, 2×4P, 2.54mm Pitch, 11.6mm L, ROHS
In Stock1,659
2630+
10+$0.039
100+$0.0313
5,000+$0.0208
10,000+$0.0197
- +
Ext. Price(USD):$0.39
MOQ:10
Mult:1
SPQ:50
ZHOURI
ECAD Model:
Pin Header 2x7P 2.54mm 11.6mm RoHS
In Stock37
2627+
5+$0.064
50+$0.0529
3,000+$0.0356
5,000+$0.0335
- +
Ext. Price(USD):$0.32
MOQ:5
Mult:1
SPQ:100
ZHOURI
ECAD Model:
Pin Header 2x5P 2.54mm 11.6mm RoHS
In Stock514
2632+
10+$0.0494
100+$0.0398
5,000+$0.0256
10,000+$0.0241
- +
Ext. Price(USD):$0.49
MOQ:10
Mult:1
SPQ:50
ZHOURI
ECAD Model:
Pin Header 2x2P 2.54mm 11.6mm RoHS
In Stock1,000
2630+
10+$0.0424
100+$0.0351
6,000+$0.0236
10,000+$0.0222
- +
Ext. Price(USD):$0.42
MOQ:10
Mult:1
SPQ:500
ZHOURI
ECAD Model:
Pin Header 1x20P 2.54mm Pitch 11.6mm L RoHS
In Stock100
2630+
5+$0.1817
50+$0.1502
3,000+$0.101
5,000+$0.0951
- +
Ext. Price(USD):$0.90
MOQ:5
Mult:1
SPQ:100
Pin Header, 1x4 Pos, 2.54mm Pitch, 11.2mm L, RoHS
In Stock768
2630+
20+$0.0181
200+$0.0151
12,000+$0.0105
20,000+$0.0096
- +
Ext. Price(USD):$0.36
MOQ:20
Mult:1
SPQ:2,000
Pin Header 1x5P 2.54mm 11.2mm RoHS
Available Stock
5,000
Estimated Ship Time:7-12 working days
25+
2,000+$0.0112
4,000+$0.0111
6,000+$0.0108
8,000+$0.0104
- +
Ext. Price(USD):$22.40
MOQ:2,000
Mult:1,000
SPQ:1,000
Pin Header, 1x40P, 2.54mm Pitch, 14mm Length, RoHS
Available Stock
1,000
Estimated Ship Time:7-12 working days
25+
400+$0.0733
800+$0.0721
1,200+$0.0703
1,600+$0.0684
- +
Ext. Price(USD):$29.32
MOQ:400
Mult:200
SPQ:200
Pin Header 1x40P 2.54mm 19mm RoHS
Available Stock
500
Estimated Ship Time:7-12 working days
25+
300+$0.0893
600+$0.0878
900+$0.0856
1,200+$0.0833
- +
Ext. Price(USD):$26.79
MOQ:300
Mult:100
SPQ:100
Pin Header 1x40P 2.54mm 8.7mm ROHS
Available Stock
1,000
Estimated Ship Time:7-12 working days
25+
600+$0.0446
1,200+$0.0438
1,800+$0.0427
2,400+$0.0417
- +
Ext. Price(USD):$26.76
MOQ:600
Mult:200
SPQ:200
Pin Header 1x40P 2.54mm 11.2mm RoHS
Available Stock
1,000
Estimated Ship Time:7-12 working days
25+
400+$0.0669
800+$0.0658
1,200+$0.0642
1,600+$0.0624
- +
Ext. Price(USD):$26.76
MOQ:400
Mult:200
SPQ:200
25 / PageGoto