Edgeboard Connectors

Results:

Edgeboard connectors create a removable electrical interface between the conductive edge of a circuit card and a host PCB or electronic system. Selection should begin with the card interface, then move across the connector to its orientation, termination and mounting footprint. Use this category to compare complete edgeboard connectors for standard interfaces such as M.2, PCI Express and Mini PCI Express, as well as connectors designed for custom PCB card edges.

Read Both Sides of an Edgeboard Connector

An edgeboard connector must match two different design environments. Its card-facing side controls how the circuit card enters and mates; its system-facing side determines how the connector fits and terminates on the host board.

Card-facing side

Define the card interface

Confirm the interface family, card thickness, contact pitch, position count, row arrangement, readout and key location. These details determine whether the PCB edge can enter and mate with the connector correctly.

↔
Edgeboard
Connector
System-facing side

Define the host-board connection

Select the connector orientation, mounting type, termination method and footprint required by the host PCB. Board locks, guides, flanges and surrounding clearance may also affect the final fit.

Selection principle: match the card-facing geometry first, then verify how the connector exits and attaches to the host system.

Choose the Interface Family First

Start by identifying whether the design uses a defined interface standard or a custom card edge. Standard interfaces can establish the expected card geometry, key position and contact arrangement. A custom edge requires every mating dimension to be checked against the connector drawing.

Standards-based interface Match the exact standard and revision used by the card. Similar-looking M.2, PCIe and Mini PCIe connectors are not interchangeable solely because their pitches or position counts appear comparable.
Custom PCB card edge Compare the PCB thickness, contact count, pitch, contact layout, keying, insertion depth and mating dimensions directly with the connector specification.

Set the Card-Facing Geometry

The following parameters describe how the circuit card and connector meet. Record them together because a match on pitch or position count alone does not establish compatibility.

Card type or interface Identifies the standard family or confirms that the connection uses a custom PCB edge.
Card thickness Must fit the specified card slot while maintaining the intended contact force.
Pitch and positions Match contact spacing and the complete position arrangement, including unused or keyed locations.
Rows and readout Confirm whether contacts are read from one or both sides of the card and how positions are numbered.
Key and insertion path Verify key location, card approach direction, insertion depth and any polarization features.

Route the System-Facing Side

After the card interface is fixed, choose how the connector will sit on the host PCB. Orientation and termination affect enclosure height, card approach, routing space, assembly method and service access.

1
Orientation Choose vertical, right-angle or another specified mounting direction according to the required card-entry path and available enclosure height.
2
Termination Match SMT, through-hole or another specified termination to the PCB footprint, assembly process and mechanical requirements.
3
Retention Check board locks, locating posts, guides, flanges or latching features used to stabilize the connector and inserted card.

Check the Mechanical Motion

A connector can match the electrical interface and still conflict with the mechanical design. Review the complete insertion and removal path before finalizing the part.

✓ Card approach and insertion direction ✓ Connector height above the host PCB ✓ Clearance around guides and latches ✓ Space required to remove the card ✓ Host-board footprint and keep-out area ✓ Mechanical support during repeated mating

Build a Complete Connector Coordinate

Before comparing part numbers, summarize the required connection as one continuous coordinate. This keeps the card-facing and system-facing requirements tied to the same connector.

Card standard or custom edge + Key, thickness and contact layout + Connector orientation + Host footprint and termination

If the design requires a separate housing, contact or another card-edge component rather than a complete edgeboard connector, browse Card Edge Connectors & Components.

Read More
Edgeboard ConnectorsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Card Edge F 30 POS 2.54mm Solder Lug ST Panel Mount
Available Stock
11
Estimated Ship Time:9-14 working days
1+$5.7888
10+$4.9172
1,000+$3.5528
2,500+$3.3306
- +
Ext. Price(USD):$28.94
MOQ:5
Mult:1
SPQ:1
Conn Card Edge F 24 POS 2.54mm Solder ST Thru-Hole
Available Stock
1,520
Estimated Ship Time:9-14 working days
1+$4.0716
10+$3.4614
1,000+$2.5006
2,500+$2.3442
- +
Ext. Price(USD):$28.50
MOQ:7
Mult:1
SPQ:1
Conn Card Edge F 36 POS 2.54mm Solder ST Thru-Hole
Available Stock
115
Estimated Ship Time:9-14 working days
1+$5.8968
10+$5.0144
1,000+$3.6228
2,500+$3.3962
- +
Ext. Price(USD):$29.48
MOQ:5
Mult:1
SPQ:1
1.00mm Pitch Contact, PCI Express, Card Extender, Straddle Mount
Available Stock
808
Estimated Ship Time:9-14 working days
1+$7.398
10+$6.2867
1,014+$4.5377
2,535+$4.254
- +
Ext. Price(USD):$29.59
MOQ:4
Mult:1
SPQ:1
Card Edge Connector F 100 Pos 2.54mm Solder Straight Thru-Hole
Available Stock
117
Estimated Ship Time:9-14 working days
1+$11.4372
10+$9.7222
500+$7.3773
1,000+$7.0256
- +
Ext. Price(USD):$34.31
MOQ:3
Mult:1
SPQ:1
CONN PCI EXP FMALE 164POS 0.039
Available Stock
307
Estimated Ship Time:9-14 working days
1+$7.452
10+$6.3353
500+$4.8069
1,170+$4.5273
- +
Ext. Price(USD):$29.80
MOQ:4
Mult:1
SPQ:1
PCIE Connector, 1.00mm Straddle Mount With Pegs
Available Stock
2,563
Estimated Ship Time:9-14 working days
1+$3.672
10+$3.1234
1,040+$2.25
2,600+$2.1093
- +
Ext. Price(USD):$29.37
MOQ:8
Mult:1
SPQ:1
Conn Card Edge F 44 POS 3.96mm Solder ST Thru-Hole
Available Stock
141
Estimated Ship Time:9-14 working days
1+$7.6788
10+$6.5221
500+$4.9489
1,000+$4.7129
- +
Ext. Price(USD):$30.71
MOQ:4
Mult:1
SPQ:1
Conn Card Edge F 72 POS 3.96mm Solder Lug ST Panel Mount
Available Stock
113
Estimated Ship Time:9-14 working days
1+$14.9256
10+$12.6824
500+$9.6241
1,000+$9.1653
- +
Ext. Price(USD):$29.85
MOQ:2
Mult:1
SPQ:1
Conn Card Edge F 80 POS 2.54mm Solder ST Thru-Hole
Available Stock
9
Estimated Ship Time:9-14 working days
1+$9.8496
10+$8.3678
500+$6.3495
1,000+$6.0467
- +
Ext. Price(USD):$29.54
MOQ:3
Mult:1
SPQ:1
Connector, Card Edge F, 20 Pos, 2.54mm Pitch, Solder ST Thru-Hole
Available Stock
686
Estimated Ship Time:9-14 working days
1+$4.5144
10+$3.8394
1,000+$2.7741
2,500+$2.6006
- +
Ext. Price(USD):$27.08
MOQ:6
Mult:1
SPQ:1
Card Edge Connector F 98 POS 2.54mm Solder RA Thru-Hole
Available Stock
13
Estimated Ship Time:9-14 working days
1+$14.9904
10+$12.7354
500+$9.6645
1,000+$9.2038
- +
Ext. Price(USD):$29.98
MOQ:2
Mult:1
SPQ:1
CONN EDGE DUAL FMALE 40POS 0.039
Available Stock
10
Estimated Ship Time:9-14 working days
1+$14.0832
10+$11.9718
- +
Ext. Price(USD):$28.16
MOQ:2
Mult:1
SPQ:1
CONN EDGE DUAL FMALE 60POS 0.100
Available Stock
48
Estimated Ship Time:9-14 working days
1+$28.296
10+$24.0527
250+$19.1676
500+$18.254
- +
Ext. Price(USD):$28.29
MOQ:1
Mult:1
SPQ:1
CONN EDGE DUAL FMALE 28POS 0.100
Available Stock
11
Estimated Ship Time:9-14 working days
1+$7.1388
10+$6.0685
1,000+$4.3845
2,500+$4.1103
- +
Ext. Price(USD):$28.55
MOQ:4
Mult:1
SPQ:1
Conn Card Edge F 10 POS 2.54mm Solder ST Thru-Hole
Available Stock
6,119
Estimated Ship Time:9-14 working days
1+$3.8448
10+$3.2692
1,000+$2.3617
2,500+$2.214
- +
Ext. Price(USD):$26.91
MOQ:7
Mult:1
SPQ:1
Conn Card Edge F 110 POS 2.54mm Wire Wrap ST Panel Mount
Available Stock
17
Estimated Ship Time:9-14 working days
1+$15.7572
10+$13.3898
500+$10.161
1,000+$9.6767
- +
Ext. Price(USD):$31.51
MOQ:2
Mult:1
SPQ:1
Conn Card Edge F 56 POS 3.96mm Solder ST Thru-Hole
Available Stock
1,234
Estimated Ship Time:9-14 working days
1+$8.4888
10+$7.2176
500+$5.4762
1,000+$5.2151
- +
Ext. Price(USD):$33.95
MOQ:4
Mult:1
SPQ:1
Conn Card Edge SKT 120 POS 2.54mm Solder ST Thru-Hole
Available Stock
10
Estimated Ship Time:9-14 working days
1+$18.4788
10+$15.701
250+$12.5112
500+$11.9148
- +
Ext. Price(USD):$36.95
MOQ:2
Mult:1
SPQ:1
Card Edge Connector F 44 POS 2.54mm Solder RA Thru-Hole
Available Stock
3
Estimated Ship Time:9-14 working days
1+$9.4824
10+$8.0546
500+$6.1112
1,000+$5.8198
- +
Ext. Price(USD):$28.44
MOQ:3
Mult:1
SPQ:1
CONN PCI CARDEDGE FML 120P 0.050
Available Stock
39
Estimated Ship Time:9-14 working days
1+$18.1116
14+$15.0267
252+$12.2548
504+$11.6706
- +
Ext. Price(USD):$36.22
MOQ:2
Mult:1
SPQ:1
Card Edge Connector M 60 Pos 2.54mm Wire Wrap ST Thru-Hole
Available Stock
358
Estimated Ship Time:9-14 working days
1+$8.4456
10+$7.1798
500+$5.4478
1,000+$5.1881
- +
Ext. Price(USD):$33.78
MOQ:4
Mult:1
SPQ:1
CONN EDGE DUAL FMALE 30POS 0.156
Available Stock
5
Estimated Ship Time:9-14 working days
1+$8.1432
10+$6.9174
500+$5.2488
1,000+$4.9985
- +
Ext. Price(USD):$32.57
MOQ:4
Mult:1
SPQ:1
Conn Card Edge F 36 POS 2.54mm Solder ST Thru-Hole
Available Stock
275
Estimated Ship Time:9-14 working days
1+$5.3244
10+$4.5284
1,000+$3.2717
2,500+$3.0671
- +
Ext. Price(USD):$26.62
MOQ:5
Mult:1
SPQ:1
Conn Card Edge F 30 POS 2.54mm Solder ST Thru-Hole
Available Stock
83
Estimated Ship Time:9-14 working days
1+$5.4
10+$4.5868
1,000+$3.314
2,500+$3.1068
- +
Ext. Price(USD):$27.00
MOQ:5
Mult:1
SPQ:1
25 / PageGoto