Edgeboard Connectors

Results:

Edgeboard connectors create a removable electrical interface between the conductive edge of a circuit card and a host PCB or electronic system. Selection should begin with the card interface, then move across the connector to its orientation, termination and mounting footprint. Use this category to compare complete edgeboard connectors for standard interfaces such as M.2, PCI Express and Mini PCI Express, as well as connectors designed for custom PCB card edges.

Read Both Sides of an Edgeboard Connector

An edgeboard connector must match two different design environments. Its card-facing side controls how the circuit card enters and mates; its system-facing side determines how the connector fits and terminates on the host board.

Card-facing side

Define the card interface

Confirm the interface family, card thickness, contact pitch, position count, row arrangement, readout and key location. These details determine whether the PCB edge can enter and mate with the connector correctly.

↔
Edgeboard
Connector
System-facing side

Define the host-board connection

Select the connector orientation, mounting type, termination method and footprint required by the host PCB. Board locks, guides, flanges and surrounding clearance may also affect the final fit.

Selection principle: match the card-facing geometry first, then verify how the connector exits and attaches to the host system.

Choose the Interface Family First

Start by identifying whether the design uses a defined interface standard or a custom card edge. Standard interfaces can establish the expected card geometry, key position and contact arrangement. A custom edge requires every mating dimension to be checked against the connector drawing.

Standards-based interface Match the exact standard and revision used by the card. Similar-looking M.2, PCIe and Mini PCIe connectors are not interchangeable solely because their pitches or position counts appear comparable.
Custom PCB card edge Compare the PCB thickness, contact count, pitch, contact layout, keying, insertion depth and mating dimensions directly with the connector specification.

Set the Card-Facing Geometry

The following parameters describe how the circuit card and connector meet. Record them together because a match on pitch or position count alone does not establish compatibility.

Card type or interface Identifies the standard family or confirms that the connection uses a custom PCB edge.
Card thickness Must fit the specified card slot while maintaining the intended contact force.
Pitch and positions Match contact spacing and the complete position arrangement, including unused or keyed locations.
Rows and readout Confirm whether contacts are read from one or both sides of the card and how positions are numbered.
Key and insertion path Verify key location, card approach direction, insertion depth and any polarization features.

Route the System-Facing Side

After the card interface is fixed, choose how the connector will sit on the host PCB. Orientation and termination affect enclosure height, card approach, routing space, assembly method and service access.

1
Orientation Choose vertical, right-angle or another specified mounting direction according to the required card-entry path and available enclosure height.
2
Termination Match SMT, through-hole or another specified termination to the PCB footprint, assembly process and mechanical requirements.
3
Retention Check board locks, locating posts, guides, flanges or latching features used to stabilize the connector and inserted card.

Check the Mechanical Motion

A connector can match the electrical interface and still conflict with the mechanical design. Review the complete insertion and removal path before finalizing the part.

✓ Card approach and insertion direction ✓ Connector height above the host PCB ✓ Clearance around guides and latches ✓ Space required to remove the card ✓ Host-board footprint and keep-out area ✓ Mechanical support during repeated mating

Build a Complete Connector Coordinate

Before comparing part numbers, summarize the required connection as one continuous coordinate. This keeps the card-facing and system-facing requirements tied to the same connector.

Card standard or custom edge + Key, thickness and contact layout + Connector orientation + Host footprint and termination

If the design requires a separate housing, contact or another card-edge component rather than a complete edgeboard connector, browse Card Edge Connectors & Components.

Read More
Edgeboard ConnectorsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
UMaxconn
Package:SMD,P=0.8mm
ECAD Model:
In Stock159
2602+
1+$0.8311
10+$0.672
450+$0.4281
900+$0.4028
- +
Ext. Price(USD):$0.83
MOQ:1
Mult:1
SPQ:450
UMaxconn
Package:SMD,P=1mm
ECAD Model:
In Stock400
2623+
1+$2.8313
10+$2.403
60+$2.0394
120+$1.7624
480+$1.6416
- +
Ext. Price(USD):$2.83
MOQ:1
Mult:1
SPQ:60
UMaxconn
Package:SMD,P=0.8mm
ECAD Model:
In Stock1,510
2610+
1+$1.0338
10+$0.8415
400+$0.5464
800+$0.5199
- +
Ext. Price(USD):$1.03
MOQ:1
Mult:1
SPQ:400
UMaxconn
Package:SMD,P=1mm
ECAD Model:
In Stock160
2613+
1+$1.5055
10+$1.2831
480+$0.8931
1,000+$0.866
- +
Ext. Price(USD):$1.50
MOQ:1
Mult:1
SPQ:40
UMaxconn
Package:SMD,P=0.85mm
ECAD Model:
In Stock150
2509+
1+$2.0906
10+$1.7689
24+$1.5628
- +
Ext. Price(USD):$2.09
MOQ:1
Mult:1
SPQ:24
In Stock54
2501+
1+$1.7805
10+$1.5006
54+$1.3295
- +
Ext. Price(USD):$1.78
MOQ:1
Mult:1
SPQ:54
UMaxconn
Package:SMD,P=1mm
ECAD Model:
In Stock76
2503+
1+$2.6394
10+$2.2285
60+$1.835
120+$1.577
- +
Ext. Price(USD):$2.63
MOQ:1
Mult:1
SPQ:60
In Stock140
2506+
1+$2.3317
10+$1.9812
30+$1.7634
70+$1.4714
- +
Ext. Price(USD):$2.33
MOQ:1
Mult:1
SPQ:70
UMaxconn
Package:SMD,P=1mm
ECAD Model:
Available Stock
6,000
Estimated Ship Time:1-4 weeks
25+
600+$0.6837
1,800+$0.6723
3,000+$0.6552
- +
Ext. Price(USD):$410.22
MOQ:600
Mult:600
SPQ:1,800
UMaxconn
Package:SMD,P=1mm
ECAD Model:
Available Stock
1,400
Estimated Ship Time:1-4 weeks
25+
70+$1.2623
210+$1.2412
350+$1.2096
- +
Ext. Price(USD):$88.36
MOQ:70
Mult:70
SPQ:2,100
Available Stock
800
Estimated Ship Time:1-4 weeks
25+
40+$1.8169
120+$1.7866
200+$1.7412
- +
Ext. Price(USD):$72.67
MOQ:40
Mult:40
SPQ:1,200
UMaxconn
Package:SMD,P=0.85mm
ECAD Model:
Pre-order
480
Factory Lead Time:4-6 weeks
26+
24+$1.2272
72+$1.2067
120+$1.1761
- +
Ext. Price(USD):$29.45
MOQ:24
Mult:24
SPQ:480
Available Stock
1,200
Estimated Ship Time:1-4 weeks
25+
60+$1.538
180+$1.5124
300+$1.4739
- +
Ext. Price(USD):$92.28
MOQ:60
Mult:60
SPQ:1,800
Available Stock
600
Estimated Ship Time:1-4 weeks
25+
30+$2.1357
90+$2.1001
150+$2.0466
- +
Ext. Price(USD):$64.07
MOQ:30
Mult:30
SPQ:900
UMaxconn
Package:SMD,P=1mm
ECAD Model:
Available Stock
950
Estimated Ship Time:5-7 working days
25+
50+$1.8965
150+$1.865
250+$1.8175
- +
Ext. Price(USD):$94.82
MOQ:50
Mult:50
SPQ:500
UMaxconn
Package:SMD,P=1mm
ECAD Model:
Available Stock
1,100
Estimated Ship Time:1-4 weeks
25+
60+$1.1555
180+$1.1362
300+$1.1073
- +
Ext. Price(USD):$69.33
MOQ:60
Mult:60
SPQ:1,800
UMaxconn
Package:SMD,P=1mm
ECAD Model:
Available Stock
1,400
Estimated Ship Time:1-4 weeks
25+
70+$0.9722
210+$0.956
350+$0.9317
- +
Ext. Price(USD):$68.05
MOQ:70
Mult:70
SPQ:2,100
UMaxconn
Package:SMD,P=1mm
ECAD Model:
Available Stock
1,200
Estimated Ship Time:1-4 weeks
25+
40+$1.7373
120+$1.7082
200+$1.6649
- +
Ext. Price(USD):$69.49
MOQ:40
Mult:40
SPQ:1,200
UMaxconn
Package:SMD,P=1mm
ECAD Model:
Available Stock
800
Estimated Ship Time:1-4 weeks
25+
40+$1.6416
120+$1.6142
200+$1.5732
- +
Ext. Price(USD):$65.66
MOQ:40
Mult:40
SPQ:1,200
UMaxconn
Package:SMD,P=1mm
ECAD Model:
Available Stock
1,500
Estimated Ship Time:1-4 weeks
25+
70+$1.2081
210+$1.188
350+$1.1577
- +
Ext. Price(USD):$84.56
MOQ:70
Mult:70
SPQ:2,100
UMaxconn
Package:SMD,P=1mm
ECAD Model:
Available Stock
1,600
Estimated Ship Time:1-4 weeks
25+
16+$2.1516
48+$2.1158
80+$2.0619
- +
Ext. Price(USD):$34.42
MOQ:16
Mult:16
SPQ:384
UMaxconn
Package:SMD,P=1mm
ECAD Model:
Available Stock
800
Estimated Ship Time:1-4 weeks
25+
40+$1.565
120+$1.539
200+$1.4999
- +
Ext. Price(USD):$62.60
MOQ:40
Mult:40
SPQ:1,200
UMaxconn
Package:SMD,P=1mm
ECAD Model:
Available Stock
1,100
Estimated Ship Time:1-4 weeks
25+
60+$1.3865
180+$1.3635
300+$1.3288
- +
Ext. Price(USD):$83.19
MOQ:60
Mult:60
SPQ:1,800
UMaxconn
Package:SMD,P=1mm
ECAD Model:
Available Stock
1,450
Estimated Ship Time:1-4 weeks
25+
16+$2.0081
48+$1.9747
80+$1.9245
- +
Ext. Price(USD):$32.12
MOQ:16
Mult:16
SPQ:384
UMaxconn
Package:SMD,P=1mm
ECAD Model:
Available Stock
1,200
Estimated Ship Time:1-4 weeks
25+
700+$0.4383
2,100+$0.431
3,500+$0.42
- +
Ext. Price(USD):$306.81
MOQ:700
Mult:700
SPQ:2,100
25 / PageGoto