D-Sub housings establish the mechanical framework for compatible contacts, locking hardware and cable-side protection. Identify whether the part is a contact-carrying connector housing or an outer cable housing, then match the manufacturer series, shell size, contact layout, plug or receptacle role, material, mounting method and required assembly components.
Identify the Housing Role
Start by locating the housing within the connector assembly. A contact-carrying housing defines the front mating interface and holds compatible contacts. A cable housing, cover or hood encloses the rear termination area and can provide cable routing, strain relief or mechanical protection. Use the product series and compatible part numbers to confirm its role.
Contact-Carrying Housing
- Forms the D-Sub mating interface
- Positions pin or socket contacts
- Defines shell size and contact layout
- Provides polarization and mating alignment
Cable Housing or Cover
- Encloses the rear termination area
- Controls cable exit direction
- Supports strain-relief hardware
- Protects contacts, wires and cable entry
Configure the Front Mating Interface
For a contact-carrying housing, identify the manufacturer series, standard-density, high-density or mixed-contact format, D-Sub shell size and exact cavity arrangement. Then confirm whether the housing is a plug or receptacle and whether it accepts pin or socket contacts. Contact count alone does not define compatibility.
Compatible front interface: Shell size + Contact layout + Housing role + Contact system
| Selection Point |
What to Confirm |
| Product Series |
Manufacturer family and specified mating connector |
| Shell Format |
Shell size, density and body dimensions |
| Contact Layout |
Number, size and arrangement of contact cavities |
| Mating Role |
Plug or receptacle with pin or socket contacts |
| Mounting |
Cable, panel or frame installation and mounting-hole spacing |
Match the Contact System
Check whether contacts are included with the housing or ordered separately. For separately supplied contacts, match the housing series, contact size, pin or socket type, wire range, termination method and plating. Browse D-Sub contacts for compatible contact options.
Confirm the required insertion procedure and tooling before assembly. Contacts must seat in the correct cavities and engage the specified retention features. Record each cavity assignment and verify the completed contact layout against the mating connector and equipment pin map.
Complete the Rear Assembly
For a cable housing or cover, match the connector size, cable diameter, cable exit direction and available installation space. Compare plastic and metal construction according to mechanical protection and shielding requirements. Add compatible D-Sub backshells when the assembly requires strain relief, cable routing or EMI/RFI shielding support.
Verify panel cutout dimensions, mounting-hole spacing, front or rear mounting position and locking-hardware compatibility. If a complete connector with installed contacts is required, browse complete D-Sub connectors.
D-Sub Housing Assembly Checklist
- Identify the part as a contact housing, cable housing, cover or hood.
- Record the manufacturer series and exact housing part number.
- Confirm shell size, density and contact-cavity arrangement.
- Match plug or receptacle with pin or socket contacts.
- Verify mounting dimensions, cable exit and available clearance.
- Select compatible contacts, backshell and locking hardware.
- Record the complete housing assembly and mating connector in the BOM.
Complete assembly: D-Sub housing → Contacts → Backshell or cover → Strain relief → Locking hardware → Cable