D-Sub contacts form the removable electrical interface inside compatible connector housings. Start with the housing series and cavity specification, then match the contact type, pin or socket gender, contact size, wire range and termination method. Confirm material, plating, current rating, tooling and retention requirements before approving the contact for production assembly.
Build the Contact Passport
Identify the contact through its connector family, interface type, function, size, conductor range and termination process. A D-Sub contact must fit the housing cavity, accept the specified wire or cable and meet the electrical requirements of its circuit.
| Contact Field |
What to Confirm |
| Connector Family |
Manufacturer, series and compatible housing |
| Interface Type |
Pin or socket contact |
| Contact Function |
Signal, power or coaxial connection |
| Contact Size |
Size and retention system supported by the cavity |
| Conductor Match |
Wire range in AWG or mm², or compatible coaxial cable |
| Termination |
Crimp, solder or another specified process |
Compatible D-Sub contact: Correct housing fit + Correct wire termination + Correct electrical rating
Match the Contact to the Housing
Begin with the exact manufacturer and series of the D-Sub housing. Confirm whether it uses standard-density, high-density or combination contacts, then verify the cavity size, contact-retention design and approved contact part number. Contacts from different D-Sub families may have similar appearances but different dimensions or retention features.
Pin contacts form the projecting mating interface, while socket contacts receive the corresponding pin. Plug or receptacle describes the connector body; pin or socket describes the contact. Check both attributes in the housing and mating-connector documentation.
Select the Contact Function
Signal Contacts
Match wire range, contact resistance, current rating and plating for control, data and low-level signal circuits.
Power Contacts
Confirm the larger contact size, conductor capacity, current rating and temperature rise for power circuits.
Coaxial Contacts
Match the cable group, impedance, conductor dimensions, shield termination and specified frequency performance.
Combination D-Sub connectors may place signal, power and coaxial contacts in the same housing. Select each contact according to the function and dimensions of its assigned cavity. Browse complete D-Sub connectors when contacts are required as part of an assembled interface.
Choose Crimp or Solder Termination
| Termination |
Selection Checks |
| Crimp |
Wire range, conductor construction, insulation diameter, strip length, tool, die and locator |
| Solder |
Solder-cup capacity, conductor size, soldering temperature and strain relief |
| Coaxial |
Center conductor, dielectric, shield dimensions and cable preparation procedure |
Verify Material and Electrical Performance
Compare contact material, plating type and thickness, rated current, contact resistance, operating temperature and mating-cycle life. Gold-plated mating surfaces are commonly selected for stable signal performance, while larger power contacts require suitable conductor capacity and current ratings. Use the individual contact datasheet for approved values.
D-Sub Contact Installation Checklist
- Verify the housing series, cavity and required contact size.
- Select the correct pin or socket and contact function.
- Match the wire range or coaxial cable dimensions.
- Crimp or solder with the approved process and tooling.
- Inspect conductor position, plating and termination quality.
- Insert the contact until its retention feature engages.
- Verify retention, cavity assignment and electrical continuity.
Use D-Sub accessories for compatible assembly and maintenance components, and record the contact part number, wire specification, tooling and cavity assignment in the BOM.