D-Sub Connectors
Results:D-Sub connectors provide a keyed, shielded interface for signal, data, low-power and mixed-contact connections. Select the required connector family and density first, then match shell size, contact count, plug or receptacle body, pin or socket contacts, mounting style and termination. Complete the assembly with compatible hardware, contacts and backshell protection.
Decode the D-Sub Interface
A compatible D-Sub interface is defined by more than its number of contacts. Identify the density, shell size, exact contact layout, connector role and contact type as one specification. Two connectors with the same contact count may use different shell dimensions, row arrangements or mating interfaces.
| Interface Detail | What to Confirm |
|---|---|
| Density | Standard density, high density or mixed contact |
| Shell Size | DE, DA, DB, DC, DD or manufacturer-specified format |
| Contact Layout | Contact count, number of rows and exact arrangement |
| Connector Role | Plug, receptacle or inline connection |
| Contact Type | Pin, socket or mixed signal, power and coaxial contacts |
Select Standard, High-Density or Mixed-Contact D-Sub
Standard-density D-Sub connectors are commonly available in 9-, 15-, 25-, 37- and 50-position formats. High-density designs place more contacts within a comparable shell size and use a different row arrangement. Mixed-contact versions combine signal contacts with larger power or coaxial positions. Match the complete layout rather than using contact count alone.
Plug and receptacle describe the connector body and its mating role, while pin and socket describe the contact interface. Confirm both attributes in the product specification. The electrical plug and socket sourcing guide provides additional terminology and sourcing guidance.
Choose Mounting and Termination
Installation
- Cable, panel or PCB mounting
- Vertical or right-angle PCB orientation
- Front-panel or rear-panel position
- Board locks or threaded inserts
- Required panel cutout and clearance
Termination
- Solder-cup termination
- Crimp contacts
- IDC ribbon-cable termination
- Through-hole PCB contacts
- Compatible wire range and tooling
When contacts are supplied separately, select compatible D-Sub contacts by connector series, contact size, pin or socket type, wire range, termination and plating. Verify whether the connector assembly includes contacts before adding separate contact part numbers to the BOM.
Complete the Mechanical and Shielding System
The D-shaped metal shell provides mating alignment and can support an EMI shielding path. Check shell material, contact plating, rated current and voltage, operating temperature and mating-cycle life. For applications with specific interference or environmental requirements, compare filtered configurations, shield continuity and sealed or IP-rated construction.
Cable-mounted connectors typically require compatible D-Sub backshells for cable exit control, strain relief, mechanical protection and shielding support. Confirm the shell size, cable diameter, straight or angled exit and hardware compatibility.
D-Sub Connector Selection Checklist
- Select standard-density, high-density or mixed-contact construction.
- Confirm the shell size, contact count and exact layout.
- Match plug or receptacle with pin or socket contacts.
- Choose cable, panel or PCB mounting and the required orientation.
- Select solder, crimp, IDC or through-hole termination.
- Verify electrical, shielding and environmental requirements.
- Record the mating connector, contacts, backshell and hardware in the BOM.
Subscribe for promotions, market news, and platform updates.











