Connectors Accessories
Results:Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.
Start with the Missing Function
Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.
| Required function | Typical accessories |
|---|---|
| Prevent terminal back-out | TPA, secondary lock or terminal retainer |
| Secure the mating pair | CPA, wedge lock, latch or locking component |
| Seal the interface | Interface seal, wire seal, gasket or cavity plug |
| Protect the cable exit | Backshell, boot or strain-relief component |
| Support mounting or routing | Bracket, clip, housing retainer or wire guide |
| Protect an unmated interface | Dust cap or protective cover |
Use the Main Connector as the Compatibility Key
Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.
Match the Installed Position
| Installation point | Compatibility checks |
|---|---|
| Contact cavity | Terminal size, locking lance, TPA orientation and insertion sequence |
| Mating interface | Positions, keying, interface seal and connector side |
| Wire entry | Wire gauge, insulation diameter and individual wire seal |
| Rear of housing | Straight or right-angle exit, backshell size and cable clearance |
| Panel or enclosure | Gasket, bracket, clip, mounting feature and panel thickness |
| Unused cavity or open face | Cavity plug, dust cap and required environmental protection |
Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.
Build the Complete Sealing System
Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.
Separate the Retention Functions
- Terminal retention: Holds each contact inside its housing cavity.
- TPA or secondary lock: Confirms and reinforces terminal seating.
- CPA: Confirms that the two connector housings are fully mated.
- Wedge lock: Retains or positions contacts in specified connector families.
- Panel retainer: Secures the connector housing to its mounting feature.
- Strain relief: Reduces cable force and bending at the wire termination.
For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.
Complete the Accessory BOM
Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.
If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.
Subscribe for promotions, market news, and platform updates.











