Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
30-Pin Cap (Cover) DF56 Series
In Stock393
2201+
1+$0.1001
10+$0.095
100+$0.0915
500+$0.0873
1,000+$0.0834
- +
Ext. Price(USD):$0.10
MOQ:1
Mult:1
SPQ:10,000
2-Pin Retainer Clip DF1E Series Panel Mount
In Stock90
2609+
1+$0.2191
10+$0.1792
100+$0.1643
500+$0.1517
1,000+$0.1408
- +
Ext. Price(USD):$0.21
MOQ:1
Mult:1
SPQ:100
40-Pin Gold
In Stock4,714
2605+
1+$0.1519
10+$0.1215
100+$0.1104
500+$0.1013
1,000+$0.0935
- +
Ext. Price(USD):$0.15
MOQ:1
Mult:1
SPQ:8,000
19-Pin Shield Plate, GT32 Series, Board Mount
In Stock290
2612+
1+$0.8335
10+$0.6714
30+$0.5935
100+$0.5157
- +
Ext. Price(USD):$0.83
MOQ:1
Mult:1
SPQ:100
In Stock127
2622+
5+$0.1739
50+$0.138
200+$0.1225
- +
Ext. Price(USD):$0.86
MOQ:5
Mult:1
SPQ:100
4-Pin Seal HVH-280 Series 21.45mm × 7.85mm × 12.55mm
In Stock1,741
2542+
1+$1.9082
10+$1.2726
100+$0.9543
500+$0.8481
1,000+$0.7633
- +
Ext. Price(USD):$1.90
MOQ:1
Mult:1
SPQ:100
2-Pin Retainer, DF22 Series, Fixed Mount, 15.5mm × 3.2mm
In Stock1,940
2626+
1+$0.2126
10+$0.1701
100+$0.1547
500+$0.1418
1,000+$0.1309
- +
Ext. Price(USD):$0.21
MOQ:1
Mult:1
SPQ:100
Shield Header, 40-Pin, DF36 Series
In Stock7,722
2631+
1+$0.0966
10+$0.0791
100+$0.0725
500+$0.0669
1,000+$0.0621
- +
Ext. Price(USD):$0.09
MOQ:1
Mult:1
SPQ:10,000
4-Pin Holder, HVH-280 Series, 29.25mm L × 28.55mm W
In Stock445
2529+
1+$0.436
10+$0.4252
30+$0.4177
100+$0.4103
- +
Ext. Price(USD):$0.43
MOQ:1
Mult:1
SPQ:100
15-Pin Shielded DF36 Series Connector
In Stock8,760
2623+
1+$0.0888
10+$0.0727
100+$0.0666
500+$0.0615
1,000+$0.0571
- +
Ext. Price(USD):$0.08
MOQ:1
Mult:1
SPQ:10,000
Shroud 19-Pin GT32 Series
In Stock950
2509+
1+$0.5986
10+$0.4898
100+$0.449
500+$0.4144
1,000+$0.3848
- +
Ext. Price(USD):$0.59
MOQ:1
Mult:1
SPQ:100
19-Pin Shield Plate, GT32 Series, Board Mount
In Stock12
2551+
5+$0.3634
50+$0.2874
200+$0.2547
- +
Ext. Price(USD):$1.81
MOQ:5
Mult:1
SPQ:100
Connector Shield 25-Pin DF36 Series
In Stock95
2501+
1+$0.0711
10+$0.0687
100+$0.0639
500+$0.0575
- +
Ext. Price(USD):$0.07
MOQ:1
Mult:1
SPQ:10,000
2-Pin Retainer DF22 Series Panel Mount
In Stock288
2225+
1+$0.2203
10+$0.2155
30+$0.2114
100+$0.1596
- +
Ext. Price(USD):$0.22
MOQ:1
Mult:1
SPQ:100
2-Pin Retainer HVH-280 Series
In Stock618
2525+
1+$0.353
10+$0.3429
30+$0.3355
- +
Ext. Price(USD):$0.35
MOQ:1
Mult:1
SPQ:100
Frame PQ50 Series Bracket Mount
In Stock80
1+$46.4881
20+$38.152
40+$35.2988
- +
Ext. Price(USD):$464.88
MOQ:10
Mult:1
SPQ:1
12-Pin Retainer, GT25 Series, Fixed Mount
In Stock2,190
22+
10+$0.221
1,000+$0.1818
2,000+$0.1681
- +
Ext. Price(USD):$2.21
MOQ:10
Mult:1
SPQ:2,000
Retainer Clip DF1E Series 5-Pin Fixed Mount 15.5mm L × 2.4mm H
In Stock5,000
18+
10+$0.235
2,500+$0.1925
5,000+$0.1785
- +
Ext. Price(USD):$2.35
MOQ:10
Mult:1
SPQ:5,000
COVER CASE, CONNECTOR, ZINC ALLOY, BLACK;
Available Stock
177
Estimated Ship Time:6-12 working days
1+$12.385
10+$12.385
250+$11.9426
500+$11.9426
- +
Ext. Price(USD):$24.77
MOQ:2
Mult:1
50-Pin Shield DF36 Series 23.92mm L
Available Stock
3,350
Estimated Ship Time:4-6 working days
24+
100+$0.1928
1,000+$0.1502
2,000+$0.1476
4,000+$0.1464
- +
Ext. Price(USD):$19.28
MOQ:100
Mult:100
SPQ:100
24-Pin Shell, Sumicon 1600 Series Connector
Available Stock
50
Estimated Ship Time:5-7 working days
1+$8.4581
- +
Ext. Price(USD):$8.45
MOQ:1
Mult:1
SPQ:100
26-Pin Cap (Cover), DF56 Series
Available Stock
14,200
Estimated Ship Time:4-6 working days
23+
100+$0.0804
1,000+$0.0727
2,000+$0.0715
4,000+$0.0709
- +
Ext. Price(USD):$8.04
MOQ:100
Mult:100
SPQ:100
Retainer, 4 Pin, DF22 Series, Panel Mount
Available Stock
21
Estimated Ship Time:4-6 working days
23+
1+$0.1459
- +
Ext. Price(USD):$0.14
MOQ:1
Mult:1
SPQ:1
DF22 Series Retainer, 3-Pin, Fixed Mount
Available Stock
385
Estimated Ship Time:4-6 working days
1+$0.1565
1,000+$0.1417
- +
Ext. Price(USD):$0.15
MOQ:1
Mult:1
SPQ:1
50-Pin Shell DF80 Series
Available Stock
2
Estimated Ship Time:4-6 working days
1+$0.9225
- +
Ext. Price(USD):$0.92
MOQ:1
Mult:1
SPQ:1
25 / PageGoto