Circular connector housings provide the mechanical shell, contact cavities and mating features for a connector system, but may require separately ordered contacts, inserts, seals or rear accessories. Select the manufacturer series, plug or receptacle style, shell size and contact arrangement first, then confirm every required component and mating part.
Confirm What Is Included with the Housing
Connector housings vary in assembly completeness. One part number may describe an empty shell, while another may include an insert, seals or selected hardware. Review the product description, package contents and manufacturer drawing before building the rest of the connector.
Possible supply configurations
- Housing or shell only
- Housing with an installed contact insert
- Housing with seals, locks or mounting hardware
- Housing supplied with selected contacts
- Complete connector assembly ready for termination
Build the Connector Kit from the Housing
Connector housing or shell
If the application requires a complete plug or receptacle rather than a separately configurable housing, compare Circular Connectors.
Separate Housing Role from Contact Gender
Plug, receptacle, pin and socket describe different parts of the interface. Confirm the manufacturer’s terminology instead of selecting the housing from a single male or female label.
| Datasheet Term |
What It Describes |
Required Check |
| Plug / Receptacle |
Mechanical role of the connector housing |
Mating interface, coupling and mounting style |
| Pin / Socket |
Gender of the installed electrical contact |
Contact type accepted by the insert or cavity |
| Male / Female Housing |
Series-specific manufacturer terminology |
Original drawing and specified mating part number |
Match the Housing Geometry
Keep the selection within one compatible connector system and verify the mechanical definition before choosing contacts or accessories:
- Series and shell size: define the basic housing and coupling interface.
- Positions and cavity arrangement: define the contact count, spacing and layout.
- Keying and polarization: control orientation and prevent incorrect mating.
- Mounting: may be cable, free-hanging, panel, flange or device mounted.
- Material and construction: affect weight, insulation, mechanical strength and environmental suitability.
Complete the Contact and Sealing Plan
For housings supplied without contacts, match the specified pin or socket series, contact size, wire gauge, termination method and plating. Check whether insertion or extraction tools are required. Unused cavities may need sealing plugs, while some systems also require wire seals, secondary locks or terminal-position-assurance components.
Environmental performance depends on the complete assembly. Confirm that all housing seals, cable-entry components, cavity plugs and mating seals are installed according to the manufacturer’s instructions before relying on an ingress-protection rating.
Create a Connector Kit BOM
Housing MPN → series → plug or receptacle → shell size → cavity arrangement → contact MPN → wire gauge → seals and locks → backshell or clamp → mating connector MPN → required tools → assembly drawing