Card Edge Accessories
Results:Card edge accessories align, polarize, retain or support a card edge connector assembly. Common products include card guides, keying plugs, latches, retaining springs, standoffs and mounting hardware. Because many accessories are designed for a particular connector family, begin with the manufacturer, series and complete part number of the connector already selected.
Select the Accessory by Its Job
Identify what the connector assembly needs before comparing individual parts. Card edge accessories generally perform one of four mechanical functions.
and PCB Card
Identify the Host Connector First
An accessory may look mechanically similar to another part while fitting a different connector series. Use the existing connector or equipment documentation as the primary reference.
Use these references to check the manufacturer’s “For Use With” or “Related Products” information before selecting an accessory.
Align the PCB with Card Guides
Card guides control the movement of the PCB as it approaches the connector. They are particularly important when the card must travel through an enclosure, rack or panel opening before reaching the mating slot.
Prevent Incorrect Insertion with Keying Parts
Keying plugs occupy a defined connector position to prevent an incompatible card or incorrectly oriented PCB from entering the assembly. Their location must correspond with the intended card-edge notch or blocked position.
Retain and Release the Card
Latches, clips and retaining springs keep the card or connector in position after mating. The correct part must provide the intended retention while still allowing the card to be serviced when required.
Set Card Height with Standoffs and Hardware
Standoffs, stud nuts and related mounting parts support the free end of a card and establish its installed height. This is common where the card enters the connector at an angle and is then secured parallel to the host PCB.
Check Accessory-Specific Details
Once compatibility is established, compare the attributes that affect installation and long-term mechanical performance.
Guide, key, latch, retainer, spring, standoff or mounting part Related products
Compatible manufacturer series or connector part number Features
Locking, sealing, locating or other specified functions Material and color
Mechanical, environmental and identification requirements
Record the Accessory Match
Keep the host connector and selected accessory linked in the BOM so that a visually similar but incompatible part is not substituted later.
For complete connectors, housings, contacts and adapters, browse Card Edge Connectors & Components.
Subscribe for promotions, market news, and platform updates.











