Backplane contacts are separately orderable pins, sockets and termination contacts fitted into compatible backplane or rack-and-panel connector housings. Begin with the connector family and housing cavity, then match the mating interface, contact size, wire range, termination method and plating; a similar-looking contact is not evidence of interchangeability.
Read the Contact from Both Ends
Mating end
Identify pin, socket or another specified interface, plus the contact size and signal, power or special-contact position it must mate with.
Housing interface
Match the manufacturer series, cavity designation, retention feature and approved backplane shell or housing.
Termination end
Confirm the conductor range, insulation limits and crimp, solder or other termination specified for the exact contact part number.
Contact fit formula: housing series + cavity/contact size + mating interface + wire range + termination + plating = an orderable contact configuration.
Turn the Datasheet into a Part-Number Match
Use the contact drawing and the housing documentation together. Record the complete series and cavity information before comparing conductor size or plating, because gender and wire gauge alone do not establish compatibility.
Contact identity: manufacturer, family, contact part number, pin/socket designation and contact size.
Conductor window: the specified AWG or mm² range, conductor construction and any insulation-diameter limit.
Termination route: crimp, solder or another stated method, including the approved applicator, die, locator and insertion or extraction tooling where required.
Contact surface: base material, mating-area plating and plating thickness as stated for the exact part; packaging form may also affect the intended assembly process.
Release the Contact to Assembly
For crimp contacts, verify strip length, conductor placement and the specified tooling, then inspect the crimp and apply the manufacturer’s pull-test or process-control requirement. Confirm that the contact locks into the intended cavity and can be serviced with the correct extraction tool.
Assembly release record Housing part number: _____ | Contact part number: _____ | Cavity/position: _____ Wire size: _____ | Termination tool: _____ | Plating: _____ | Insertion/extraction tool: _____
Subscribe for promotions, market news, and platform updates.
I agree to receive marketing emails about promotions, market news, and platform updates. I understand that I can withdraw my consent at any time. Please review our Privacy Policy.