ARINC Connectors

Results:

ARINC connectors provide standardized rack-and-panel interconnections between avionics equipment and its mounting rack. This category primarily covers ARINC 404 and ARINC 600 plugs, receptacles and configured connector assemblies. Select the ARINC standard first, then match the equipment and rack sides before specifying shell size, insert arrangement, contact technologies, termination and keying.

Follow the ARINC Configuration Sequence

1. Standard ARINC 404 or 600
2. Side Equipment or rack
3. Shell Size and plating
4. Inserts Layout and cavities
5. Contacts Signal to optical
6. Keying Mating control

Choose the ARINC Standard First

ARINC 404

A long-established rack-and-panel connector system used in commercial and military avionics equipment. Match the shell arrangement, insert configuration, contact type and applicable manufacturer series.

Also check whether the application references a corresponding MIL-DTL-81659 configuration.

ARINC 600

A high-density, low-insertion-force rack-and-panel system that supports blind mating and configurable combinations of signal, power and high-speed contacts.

Confirm shell size, insert arrangement, contact release direction, keying and equipment-to-rack compatibility.

ARINC 801 has a different selection path

ARINC 801 identifies a multi-channel fiber-optic connection using ceramic termini in circular connector formats. Do not apply ARINC 404 or ARINC 600 rectangular rack-and-panel shell and insert rules to an ARINC 801 optical connector.

Match Both Sides of the Rack Interface

ARINC rack-and-panel systems mate an equipment-side connector with a rack-side connector. Verify the installation side and mating direction before using contact gender or plug and receptacle terminology to select a part.

Equipment Side

Confirm the connector installed on the avionics line-replaceable unit, its shell style, mounting position and contact arrangement.

Rack Side

Match the rack-mounted connector, floating alignment features, mating hardware and clearance required for blind insertion.

Mating Pair

Cross-check the manufacturer series, ARINC standard, shell size, insert layout, keying position and pin or socket relationship.

Build the Shell and Insert Arrangement

Shell Size
For ARINC 600, confirm Size 1, 2 or 3 and the corresponding plug or receptacle shell style.
Insert Arrangement
Match every insert code and cavity position rather than relying only on the total contact count.
Environmental Design
Choose sealed or unsealed construction and verify the applicable environmental class.
Shell Finish
Check shell material, plating, grounding requirements and compatibility with the installation environment.
Polarization
Record the keying or polarizing position on both halves to prevent an incorrect mating combination.

Assign the Contact Technologies

A single ARINC connector can carry several electrical or optical functions. Define the function required in each insert cavity before selecting the contact size and termination.

Signal Discrete circuits
Power Higher-current paths
Coaxial Shielded RF signals
Triax Multi-shield circuits
Quadrax High-speed differential data
Optical Fiber connections

For each cavity, verify contact size, wire gauge or cable construction, electrical rating, impedance where applicable, front- or rear-release direction and the required insertion and extraction tooling.

Select the Termination and Installation Method

Crimp Termination

Match contact size, conductor range, contact release direction and the approved crimp and extraction tools.

Solder-Tail Termination

Verify the PCB footprint, tail length, board thickness, connector orientation and soldering process.

Press-Fit Termination

Confirm plated-hole requirements, compliant-pin specification, board stack-up and installation tooling.

Complete the ARINC Connector BOM

An orderable ARINC interconnection may require separate shells, inserts, contacts, keying parts, backshells and tools. Confirm what is included with each manufacturer part number before completing the BOM.

Insert Configuration Use compatible ARINC Plug-in Modules when the inserts are ordered separately from the shell.
Shell and Housing Review Backplane Shells/Housings for separately supplied mechanical connector bodies.
Contact Population Compare compatible Backplane Contacts by contact size, gender, termination and conductor range.

Record the Complete ARINC Configuration

Use the manufacturer drawing and ordering code to record every selection before comparing equivalent parts:

ARINC standard + equipment or rack side + shell size + insert arrangement + contact technologies + termination + keying + environmental class

Read More
ARINC ConnectorsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Hirose Electric
Package:SMD,P=1mm
ECAD Model:
CONN PLUG FPC 0.7MM
Available Stock
100
Estimated Ship Time:4-6 working days
1+$0.4679
- +
Ext. Price(USD):$0.46
MOQ:1
Mult:1
SPQ:1
Hirose Electric
Package:SMD,P=0.6mm
ECAD Model:
Conn Board to Board RCP 4Power/50Signal POS 3mm/0.6mm Solder ST Top Entry SMD T/R
Available Stock
840
Estimated Ship Time:14-17 working days
10+$3.9401
30+$3.351
200+$2.7609
300+$2.7487
- +
Ext. Price(USD):$51.22
MOQ:13
Mult:1
SPQ:1
Board to Board Connector, F, 80 POS, 1mm Pitch, Solder, ST, TH, Tray
Available Stock
948
Estimated Ship Time:14-17 working days
10+$4.4018
30+$3.5497
500+$2.5956
1,000+$2.5854
- +
Ext. Price(USD):$52.82
MOQ:12
Mult:1
SPQ:1
Available Stock
269
Estimated Ship Time:6-13 working days
1+$4.393
10+$3.575
1,000+$2.646
3,000+$2.4732
- +
Ext. Price(USD):$17.57
MOQ:4
Mult:1
SPQ:1
25 / PageGoto