Accessories

Results:

Circular connector accessories complete the protection, sealing, mounting and maintenance of compatible connector assemblies. Browse dust caps, sealing plugs, flange gaskets, mounting nuts and related hardware by connector series, shell size, mounting position, material and environmental requirement. Confirm the manufacturer part series and interface dimensions before adding an accessory to the assembly.

Select Accessories by Assembly Function

Start with the connector that requires an accessory, then identify the unprotected or incomplete point in the assembly. The required part may protect an unmated interface, seal an unused opening, secure the connector to a panel or retain another component. Match every accessory to the manufacturer series and connector dimensions before checking environmental performance.

Function Typical Accessories Selection Focus
Protect Dust caps and protective covers Interface type, shell size and attachment method
Seal Sealing plugs, flange gaskets and O-rings Seal location, dimensions, material and temperature
Mount Mounting nuts, washers and panel hardware Thread, panel opening and mounting side
Retain Clips, rings and locking hardware Series compatibility and retention position

Match the Accessory to the Connector

Use the manufacturer name and part series of the existing circular connector as the starting reference. Confirm the shell size, plug or receptacle interface, coupling thread, flange dimensions and intended mounting position. A similar-looking cap, gasket or nut may use different threads, sealing surfaces or retention features.

Connector Details

  • Manufacturer and product series
  • Shell or interface size
  • Plug or receptacle side
  • Thread and coupling dimensions
  • Front-mount or rear-mount installation

Accessory Details

  • Accessory type and installation point
  • Material and finish
  • Seal or gasket dimensions
  • Attachment and retention method
  • Operating temperature and environment

Complete the Sealing Path

Identify where environmental protection is required. A dust cap protects an unmated connector interface, while a sealing plug closes an unused cavity or opening. A flange gasket seals the joint between a panel-mounted connector and the equipment enclosure. At the cable entry, compatible backshells and cable clamps can provide cable retention, strain relief and additional environmental protection.

Verify the material against the expected temperature, moisture, chemicals, sunlight and mechanical exposure. The final IP rating depends on the complete assembly, including the connector, accessory, seals, mating component and correct installation. Use the published rating for the assembled configuration rather than treating one accessory as an independent guarantee.

Circular Connector Accessory Checklist

  1. Record the connector manufacturer, series and part number.
  2. Identify whether the accessory must protect, seal, mount or retain.
  3. Confirm the shell size, thread, interface and installation side.
  4. Compare material, finish and operating-temperature requirements.
  5. Check the required gasket, seal and attachment hardware.
  6. Verify fit, retention and environmental protection after installation.

For M12 assemblies, use the M12 connector selection guide to confirm the connector format, mounting arrangement and environmental requirements. Record each accessory as a separate BOM item with its compatible connector part number to simplify assembly review and replacement sourcing.

Read More
AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Strain Relief, Wire Mount, Black
Available Stock
186
Estimated Ship Time:9-14 working days
10+$7.5708
50+$5.9292
100+$4.9572
200+$4.1904
500+$3.9528
- +
Ext. Price(USD):$75.70
MOQ:10
Mult:10
SPQ:1
Strain Relief, Wire Mount, Black
Available Stock
60
Estimated Ship Time:9-14 working days
10+$7.5708
50+$5.9292
100+$4.9572
200+$4.1904
500+$3.9528
- +
Ext. Price(USD):$75.70
MOQ:10
Mult:10
SPQ:1
Strain Relief, Wire Mount, Black
Available Stock
187
Estimated Ship Time:9-14 working days
10+$7.884
50+$6.1668
100+$5.1516
200+$4.3632
500+$4.1148
- +
Ext. Price(USD):$78.84
MOQ:10
Mult:10
SPQ:1
Strain Relief, Wire Mount, Black
Available Stock
300
Estimated Ship Time:9-14 working days
10+$8.0028
50+$6.264
100+$5.238
200+$4.428
500+$4.1796
- +
Ext. Price(USD):$80.02
MOQ:10
Mult:10
SPQ:1
Strain Relief, Wire Mount, Black
Available Stock
40
Estimated Ship Time:9-14 working days
10+$7.5708
50+$5.9292
100+$4.9572
200+$4.1904
500+$3.9528
- +
Ext. Price(USD):$75.70
MOQ:10
Mult:10
SPQ:1
Strain Relief, Wire Mount, Black
Available Stock
12
Estimated Ship Time:9-14 working days
10+$4.4604
50+$3.4884
100+$2.916
200+$2.4732
500+$2.3328
- +
Ext. Price(USD):$44.60
MOQ:10
Mult:10
SPQ:1
Strain Relief, Wire Mount, Black
Available Stock
449
Estimated Ship Time:9-14 working days
10+$7.56
50+$5.9184
100+$4.9464
200+$4.1904
500+$3.942
- +
Ext. Price(USD):$75.60
MOQ:10
Mult:10
SPQ:1
Strain Relief, Wire Mount, Black
Available Stock
403
Estimated Ship Time:9-14 working days
10+$7.5708
50+$5.9292
100+$4.9572
200+$4.1904
500+$3.9528
- +
Ext. Price(USD):$75.70
MOQ:10
Mult:10
SPQ:1
25 / PageGoto